OZ ATV :: The Australian ATV Forum Forum Index OZ ATV :: The Australian ATV Forum
Australia's Largest ATV Forum


fuel & oil mixture banshee

Post new topic Reply to topic OZ ATV :: The Australian ATV Forum Forum Index -> Technical
View previous topic :: View next topic
banshie
50cc nipper


Joined: 09 May 2007
Posts: 45
Location: melbourne vic

PostPosted: Wed Oct 24, 2007 10:13 am Post subject: fuel & oil mixture banshee Reply with quote Back to top

gone from standard pipes to pro circut platinum any help would be good thx
 
View user's profile Send private message
Sponsor
skiart122
50cc nipper


Joined: 21 Aug 2007
Posts: 26

PostPosted: Wed Oct 24, 2007 11:05 am Post subject: Fuel mix Reply with quote Back to top

Hi
I have a shee I run a K&N filter with an outwears sock and cover,It also has a Dyno jet kit that you can re jet the carbi's I run castrol TTS 30:1 for beach work mainly. This mix also handles dirt.
 
View user's profile Send private message
M.F.I.
Blaster class


Joined: 01 Mar 2007
Posts: 124
Location: Gold Coast-Brisbane

PostPosted: Wed Oct 24, 2007 2:51 pm Post subject: Reply with quote Back to top

How hard do you ride???

Start at 30 to 1. Check smoke and pipe oiling.

I let the kids and missus ride mine, so even at 40 to 1 it still fouls up and loads the pipe with oil.

You air fuel ratio is more critical than the oil I would have thought as this is what gets affected most by exhaust and air mods. Too lean and you'll get melt down at high RPM no matter what oil setting and too rich will run like a bag of sh!t.

Proceed with caution!!!!
_________________
RAPTOR 660:
770cc Balanced & Blueprinted

BANSHEE
Trinity 410cc Kit:

I let people merge in front of me coz it makes me feel good??????
 
View user's profile Send private message
Stock As A Rock
4fiddy Racer


Joined: 17 Sep 2007
Posts: 245
Location: Nelson Bay...NSW

PostPosted: Thu Nov 01, 2007 1:41 pm Post subject: Reply with quote Back to top

The air fuel ratio should be ya first priority, i run TTS 35-1...should put a K&N filter on and remove ya air box lid and re-jet why ya there, you have already brought the expensive part...
_________________
"Its Only A Flesh Wound !!!"
_________________
 
View user's profile Send private message
rocknroll
50cc nipper


Joined: 06 Nov 2007
Posts: 13
Location: Mandurah

PostPosted: Thu Nov 08, 2007 8:37 am Post subject: Reply with quote Back to top

hwo bout if i wanted to put oil into a 20L jerry can? how much oil would i need in?
 
View user's profile Send private message MSN Messenger
my350yfm
Blaster class


Joined: 01 Nov 2007
Posts: 143

PostPosted: Thu Nov 08, 2007 9:35 am Post subject: d Reply with quote Back to top

rock and roll give it up you dont own a banshee you own a 90cc little junior quad, that goes 10k per hour, a banshee is much to flash for you. haha. just jokes please people answer his question hes not very smart.
 
View user's profile Send private message
looking
Big Bore, Stroked & Bling +


Joined: 11 Jul 2007
Posts: 335

PostPosted: Thu Nov 08, 2007 10:13 am Post subject: Reply with quote Back to top

i run 600mls of oil to 20l of gas
 
View user's profile Send private message
my350yfm
Blaster class


Joined: 01 Nov 2007
Posts: 143

PostPosted: Thu Nov 08, 2007 10:31 am Post subject: a Reply with quote Back to top

what oil do you recommend?
 
View user's profile Send private message
BARN-6
Roostin Away


Joined: 12 May 2006
Posts: 684
Location: Upside down in the tyre wall

PostPosted: Thu Nov 08, 2007 4:24 pm Post subject: Reply with quote Back to top

Had banshee with 421 stroker ran motol 800 '
500ml to 20l gerry can worked for me
 
View user's profile Send private message MSN Messenger
rocknroll
50cc nipper


Joined: 06 Nov 2007
Posts: 13
Location: Mandurah

PostPosted: Thu Nov 08, 2007 10:34 pm Post subject: Reply with quote Back to top

ok thank u, i hear so many different amounts and so many different brands im never sure how much or what to do. thank u to the ppl who answered.
 
View user's profile Send private message MSN Messenger
4stroker



Joined: 15 Jan 2007
Posts: 1420
Location: North Queensland

PostPosted: Fri Nov 09, 2007 7:43 am Post subject: Reply with quote Back to top

i run silkolene at 25:1

pulled my bansh apart after it had done 5 years work, honed it, put some new rings in and away i go again...

the oil is what keeps the crank alive, the fuel keeps the top end alive, if your floggin it and doin max revs alot then your gonna need a rich oil:fuel ratio

remember if you change your oil:fuel mix too much you will have to rejet, the more oil there is in your fuel, the bigger your main jet will have to be

ohhhh youve changed pipes

run 25:1 and 310 mainjets you should be right with a K&n with no lid, BUT, everyones bike is different, so do a few plug chops to make sure
_________________
2002 SE Banshee
 
View user's profile Send private message
my350yfm
Blaster class


Joined: 01 Nov 2007
Posts: 143

PostPosted: Fri Nov 09, 2007 11:07 am Post subject: a Reply with quote Back to top

so confused!!
 
View user's profile Send private message
4stroker



Joined: 15 Jan 2007
Posts: 1420
Location: North Queensland

PostPosted: Fri Nov 09, 2007 11:53 am Post subject: Re: a Reply with quote Back to top

my350yfm wrote:
so confused!!


lol what are you confused about?

there are heaps of jetting "how tos" floating around on the net, read all you can!
_________________
2002 SE Banshee
 
View user's profile Send private message
Stock As A Rock
4fiddy Racer


Joined: 17 Sep 2007
Posts: 245
Location: Nelson Bay...NSW

PostPosted: Fri Nov 09, 2007 1:18 pm Post subject: Reply with quote Back to top

I run castrol TTS 600mL to 20L fuel= bout 33:1 ratio.......4L TTS=$77
_________________
"Its Only A Flesh Wound !!!"
_________________
 
View user's profile Send private message
altech1
50cc nipper


Joined: 09 Nov 2007
Posts: 11

PostPosted: Wed Nov 14, 2007 10:27 pm Post subject: Re: fuel & oil mixture banshee Reply with quote Back to top

[quote="banshie"]gone from standard pipes to pro circut platinum any help would be good thx[/quote]

be a good ideer to bring the pilots up 27.5 or 30 and set the air screew
about 2 turns out that a good starting point.
40:1 fule/oil mix is pritty safe for a banshee being water cooled
just make shour you use a good brand of 2stroke oil. tts is good but
motuol 800 factory is what i like to use. just keep in mind that puting more oil in the fule mix can sometimes harm the engine with lio"s of to day have alot of fricion modefiers and can gliaze barells and cause blow by


sorry about spelling all mercanics carnt spell Cool
 
View user's profile Send private message
altech1
50cc nipper


Joined: 09 Nov 2007
Posts: 11

PostPosted: Wed Nov 14, 2007 10:40 pm Post subject: Reply with quote Back to top

for got to menchen theres a good jeting guide in the tec posts
{ jeting for dummes } or if you like you can pm me and i can send you
sume info on this type of stuff



ps im looking for spelling for dummes book carnt seam to find one. eek lol at my exspens
 
View user's profile Send private message
OZ_450
The Day Starts With OZATV !


Joined: 12 Feb 2006
Posts: 1631
Location: those who need to know knows :)

PostPosted: Thu Nov 15, 2007 5:27 am Post subject: Reply with quote Back to top

shouldnt have to change ya pilot jets with only a pipe and filter mod only main jats should be changed

i have a dyno jet kit for a banshee sitting in shed here if ya interested can have pretty cheap has the 2 needles and a fair assortment of jets in it already
_________________
black covered in 5.7 powered oversize quad
model vx ss 350 hahaha
enough bass to compensate for lack of skills
Empty Wallet Racing proudly on track for GM Motorsport Smile
 
View user's profile Send private message
ashnery
Moderator


Joined: 03 Jul 2006
Posts: 927
Location: www.dn.eng.com.au

PostPosted: Sat Nov 17, 2007 7:53 pm Post subject: Reply with quote Back to top

I alway go
27.5 pilots
600 ml valvoline outboard oil 2 stroke 20l petrol premium bp
300 to 280 main jet
on a ported motor with pipes
workes just fine


Last edited by ashnery on Sat Nov 17, 2007 8:58 pm; edited 1 time in total
 
View user's profile Send private message Send e-mail
Quad
The Day Starts With OZATV !


Joined: 22 Oct 2006
Posts: 2773
Location: UP FRONT

PostPosted: Sat Nov 17, 2007 8:43 pm Post subject: good Reply with quote Back to top

thanx for the out board oil boost also no air box lid
 
View user's profile Send private message
ashnery
Moderator


Joined: 03 Jul 2006
Posts: 927
Location: www.dn.eng.com.au

PostPosted: Sat Nov 17, 2007 8:55 pm Post subject: Reply with quote Back to top

GOOD ON YA QUAD
YOU PUT ME ONTO IT .
I must say that they run 10k marine 2 stroke engines on this stuff.
Its high quality and sells at any super cheap auto.
thanks again quad for the tip..
You dont mind if I pass this on to fellow banshee men ....lol
For all our blood is pure
 
View user's profile Send private message Send e-mail
ashnery
Moderator


Joined: 03 Jul 2006
Posts: 927
Location: www.dn.eng.com.au

PostPosted: Sat Nov 17, 2007 8:57 pm Post subject: Reply with quote Back to top

As quad said no air box lid
 
View user's profile Send private message Send e-mail
Display posts from previous:
Post new topic Reply to topic OZ ATV :: The Australian ATV Forum Forum Index -> Technical All times are GMT + 10 Hours
Page 1 of 1


Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
© 2001, 2002 phpBB Group

OZATV.com managed by KPS