 |
|
|
|
|
|
|
|
|
|
SSYFZ450
90cc 2 stroke / 110 4 stroke
Joined: 26 Mar 2007
Posts: 66
Location: NEAR THE HILLS - VIC
|
 Posted: Fri Apr 27, 2007 12:05 pm Post subject: Cut off switch wiring YFZ450 |
  |
|
| Does anyone know which is the best wire to join in a Pro design Cut off Switch on YFZ450?? Thought it might be easier to ask first than muck around trying to find it and blow up something. Done it before on Banshee but not sure about 450 |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
WAT4
Blaster class
Joined: 21 Feb 2006
Posts: 175
Location: Mount Gambier SA
|
| Posted: Fri Apr 27, 2007 3:55 pm Post subject: |
|
|
Go under the nose cone behind the LH headlight and there is a connector with a red and white wire into it. You want to join one side of your kill switch to the white wire and the other to a good earth.
_________________
DNA ATV Racing 09 KTM300EXC |
|
| |
|
|
|
|
|
|
|
|
SSYFZ450
90cc 2 stroke / 110 4 stroke
Joined: 26 Mar 2007
Posts: 66
Location: NEAR THE HILLS - VIC
|
| Posted: Fri Apr 27, 2007 4:04 pm Post subject: |
|
|
| Thanks heaps!!! |
|
| |
|
|
|
|
|
|
|
|
HUGE
Roostin Away
Joined: 10 Sep 2006
Posts: 625
|
| Posted: Fri Apr 27, 2007 7:27 pm Post subject: |
|
|
would that be the same on a 700 raptor?
_________________
-------------------------------------------------------
THE BIGGER YOU ARE THE HARDER YOU FALL |
|
| |
|
|
|
|
|
|
|
|
PeteW
Moderator
Joined: 09 Feb 2006
Posts: 1877
Location: Doreen, Vic
|
| Posted: Fri Apr 27, 2007 10:57 pm Post subject: |
|
|
even better join one to the white wire and the other to red, this way you won't have to re-wire it if you ever get an after market ignition.
_________________
www.thumbpump.com
www.dirtcomp.com.au |
|
| |
|
|
|
|
|
|
|
|
SSYFZ450
90cc 2 stroke / 110 4 stroke
Joined: 26 Mar 2007
Posts: 66
Location: NEAR THE HILLS - VIC
|
| Posted: Mon Apr 30, 2007 10:09 am Post subject: |
|
|
| Thanks to all - switch on and wired up - Working fine |
|
| |
|
|
|
|
|
|
|
|
rc
4fiddy Racer
Joined: 11 Jun 2007
Posts: 266
Location: west oz
|
| Posted: Sat Jul 28, 2007 1:19 pm Post subject: |
|
|
hi all just doing the same thing but am unsure where it is or if i;m looking at the same wire.
standing in front of the bike is it behind the right light and the connector has a red with white stripe and the other blue or brown is that it.cos they join into a blue plastic wire cover .please help |
|
| |
|
|
|
|
|
|
|
|
rc
4fiddy Racer
Joined: 11 Jun 2007
Posts: 266
Location: west oz
|
| Posted: Sat Jul 28, 2007 2:17 pm Post subject: |
|
|
| pretty sure i found the red and the white wire.I connected it up and the bike woundnt start.tried swapping it over still no start.i twitched the wires together is this the problem or do they need to be plugged. |
|
| |
|
|
|
|
|
|
|
|
PeteW
Moderator
Joined: 09 Feb 2006
Posts: 1877
Location: Doreen, Vic
|
| Posted: Sun Jul 29, 2007 10:48 am Post subject: |
|
|
those wires need to be plugged up and you can tap the kill switch wires into them.
_________________
www.thumbpump.com
www.dirtcomp.com.au |
|
| |
|
|
|
|
|
|
|
|
rc
4fiddy Racer
Joined: 11 Jun 2007
Posts: 266
Location: west oz
|
| Posted: Sun Jul 29, 2007 11:10 am Post subject: kill switch |
|
|
i'm still a bit unsure.The reason it didnt work yesterday was because they werent plugged is that right.
so with the red and white wires which one do i use the top two or the bottom two? |
|
| |
|
|
|
|
|
|
|
|
PeteW
Moderator
Joined: 09 Feb 2006
Posts: 1877
Location: Doreen, Vic
|
| Posted: Sun Jul 29, 2007 11:26 am Post subject: Re: kill switch |
|
|
| rc wrote: | i'm still a bit unsure.The reason it didnt work yesterday was because they werent plugged is that right.
so with the red and white wires which one do i use the top two or the bottom two? |
what you need to do is strip a bit of the cove back on both wires and hook the kill switch wires straight onto the red and white wires, it doesn't matter which side of the connector you wire into just as long as its hooked up. the plug should only have a red wire and a white wire going into it from the stator. the white wire is the pulse wire for the stator so if its not plugged in the spark plug wont fire. hope this helps RC
_________________
www.thumbpump.com
www.dirtcomp.com.au |
|
| |
|
|
|
|
|
|
|
|
rc
4fiddy Racer
Joined: 11 Jun 2007
Posts: 266
Location: west oz
|
| Posted: Sun Jul 29, 2007 6:06 pm Post subject: kill switch |
|
|
| cheers that helps heaps so just carefully strip back the wire and connect a wire to each side and presto.will give it a try cheers pete. |
|
| |
|
|
|
|
|
|
|
|
rc
4fiddy Racer
Joined: 11 Jun 2007
Posts: 266
Location: west oz
|
| Posted: Wed Aug 01, 2007 8:10 pm Post subject: |
|
|
| cheers pete and all for all your help much appreciated Ps works great. |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
