OZ ATV :: The Australian ATV Forum Forum Index OZ ATV :: The Australian ATV Forum
Australia's Largest ATV Forum


ignition coils

Post new topic Reply to topic OZ ATV :: The Australian ATV Forum Forum Index -> Technical
View previous topic :: View next topic
hazaya
50cc nipper


Joined: 02 Jan 2012
Posts: 7
Location: Julatten, QLD

PostPosted: Mon Jan 02, 2012 1:52 am Post subject: ignition coils Reply with quote Back to top

hi all

i recently bought 2 quads ,one is a Honda TRX 300 1999 in a very bad and rusty condition and the other is a chinese 250 cc with a ZONGSHEN engine .
i decided to take those 2 as a project and renovate them both ,the honda for myself and the chinese for my partner.
with the honda i'm ok for now as i purchased the service manual which is very helpful ,i also bought a refurbished and painted frame so so far no problems but i'm pretty sure i'll have a few questions along the way about it. Wink

now for my question : the Chinese quad is a mystery . all i know is that it has a ZONGSHEN engine and it's a 250cc, 3 speed + reverse , 2008 made and that's it.
If anyone recognizes the brand and can give me some details on it, or can point me to where i can find more details,that would be great.


when i looked at the Chinese ignition coil i saw that it's broken and needs to be replaced.
on the coil it said xfd0708 ,i looked everywhere and couldn't find the same coil .
can anyone explain to me how the hell do i find the right coil for that quad?
does it have to be the same coil or any coil for chinese quad will work?
on the coil it sais xfd0708 ,i looked everywhere and couldn't find the same coil
can anyone explain to me how does the chinese quads parts replacement works? where do i begin with looking for the right parts?


Last edited by hazaya on Tue Jan 17, 2012 2:15 am; edited 1 time in total
 
View user's profile Send private message
Sponsor
gazman
Big Bore, Stroked & Bling +


Joined: 08 Jul 2007
Posts: 346
Location: gold coast

PostPosted: Mon Jan 02, 2012 9:21 am Post subject: quad Reply with quote Back to top

pretty much any chinese 200-250 coil will fit and work.parts are plenty at places like ice bear in brisbane,elstars in sydney etc.so many parts are interchangeable and cheap.
gazman
 
View user's profile Send private message Send e-mail
buzzbro
Big Bore, Stroked & Bling +


Joined: 10 Dec 2006
Posts: 426
Location: QLD

PostPosted: Mon Jan 02, 2012 12:15 pm Post subject: Reply with quote Back to top

they change so often so replacement parts are always an issue. I have seen a few adds somewhere for places that specialise in wrecking chinese bikes and quads. I think the add was in one of those "just bikes" magazines.
_________________
I am old and wise because i survived young and stupid
 
View user's profile Send private message
buzzbro
Big Bore, Stroked & Bling +


Joined: 10 Dec 2006
Posts: 426
Location: QLD

PostPosted: Mon Jan 02, 2012 12:18 pm Post subject: Reply with quote Back to top

I don't know but this may be worth a try
http://www.xmotos.com.au/china_dirt_bike_parts.html
_________________
I am old and wise because i survived young and stupid
 
View user's profile Send private message
gazman
Big Bore, Stroked & Bling +


Joined: 08 Jul 2007
Posts: 346
Location: gold coast

PostPosted: Mon Jan 02, 2012 1:37 pm Post subject: coil Reply with quote Back to top

I found a spare one .pm me your address and i will post it to you.
its off a 250,same as yours.
gazman
 
View user's profile Send private message Send e-mail
hazaya
50cc nipper


Joined: 02 Jan 2012
Posts: 7
Location: Julatten, QLD

PostPosted: Tue Jan 03, 2012 5:36 pm Post subject: thanks guys Reply with quote Back to top

for the quick replies

gazman,i just sent you a PM ,and again,thanks alot for that,your a legend.

so,yes,hopefully the ignition coil is the problem,and once i'll have it,it will start.
meanwhile,i'm painting and cleaning the chinese one.
i'm also derusting alot of the Honda parts and slowley repanting them till i'll get the new frame.

will keep you updated. Smile
 
View user's profile Send private message
Display posts from previous:
Post new topic Reply to topic OZ ATV :: The Australian ATV Forum Forum Index -> Technical All times are GMT + 10 Hours
Page 1 of 1


Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
© 2001, 2002 phpBB Group

OZATV.com managed by KPS