 |
 |
OZ ATV :: The Australian ATV Forum Australia's Largest ATV Forum
|
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
hazaya 50cc nipper
Joined: 02 Jan 2012 Posts: 7 Location: Julatten, QLD  |
Posted: Mon Jan 02, 2012 1:52 am Post subject: ignition coils |
 |
|
hi all
i recently bought 2 quads ,one is a Honda TRX 300 1999 in a very bad and rusty condition and the other is a chinese 250 cc with a ZONGSHEN engine .
i decided to take those 2 as a project and renovate them both ,the honda for myself and the chinese for my partner.
with the honda i'm ok for now as i purchased the service manual which is very helpful ,i also bought a refurbished and painted frame so so far no problems but i'm pretty sure i'll have a few questions along the way about it.
now for my question : the Chinese quad is a mystery . all i know is that it has a ZONGSHEN engine and it's a 250cc, 3 speed + reverse , 2008 made and that's it.
If anyone recognizes the brand and can give me some details on it, or can point me to where i can find more details,that would be great.
when i looked at the Chinese ignition coil i saw that it's broken and needs to be replaced.
on the coil it said xfd0708 ,i looked everywhere and couldn't find the same coil .
can anyone explain to me how the hell do i find the right coil for that quad?
does it have to be the same coil or any coil for chinese quad will work?
on the coil it sais xfd0708 ,i looked everywhere and couldn't find the same coil
can anyone explain to me how does the chinese quads parts replacement works? where do i begin with looking for the right parts?
Last edited by hazaya on Tue Jan 17, 2012 2:15 am; edited 1 time in total |
|
| |
|
|
|
 |
 |
 |
 |
 |
Sponsor  |
|
|
|
 |
 |
 |
 |
 |
gazman Big Bore, Stroked & Bling +
Joined: 08 Jul 2007 Posts: 346 Location: gold coast  |
Posted: Mon Jan 02, 2012 9:21 am Post subject: quad |
 |
|
pretty much any chinese 200-250 coil will fit and work.parts are plenty at places like ice bear in brisbane,elstars in sydney etc.so many parts are interchangeable and cheap.
gazman |
|
| |
|
|
|
 |
 |
 |
 |
 |
buzzbro Big Bore, Stroked & Bling +

Joined: 10 Dec 2006 Posts: 426 Location: QLD  |
Posted: Mon Jan 02, 2012 12:15 pm Post subject: |
 |
|
they change so often so replacement parts are always an issue. I have seen a few adds somewhere for places that specialise in wrecking chinese bikes and quads. I think the add was in one of those "just bikes" magazines. _________________ I am old and wise because i survived young and stupid |
|
| |
|
|
|
 |
 |
 |
 |
 |
buzzbro Big Bore, Stroked & Bling +

Joined: 10 Dec 2006 Posts: 426 Location: QLD  |
|
| |
|
|
|
 |
 |
 |
 |
 |
gazman Big Bore, Stroked & Bling +
Joined: 08 Jul 2007 Posts: 346 Location: gold coast  |
Posted: Mon Jan 02, 2012 1:37 pm Post subject: coil |
 |
|
I found a spare one .pm me your address and i will post it to you.
its off a 250,same as yours.
gazman |
|
| |
|
|
|
 |
 |
 |
 |
 |
hazaya 50cc nipper
Joined: 02 Jan 2012 Posts: 7 Location: Julatten, QLD  |
Posted: Tue Jan 03, 2012 5:36 pm Post subject: thanks guys |
 |
|
for the quick replies
gazman,i just sent you a PM ,and again,thanks alot for that,your a legend.
so,yes,hopefully the ignition coil is the problem,and once i'll have it,it will start.
meanwhile,i'm painting and cleaning the chinese one.
i'm also derusting alot of the Honda parts and slowley repanting them till i'll get the new frame.
will keep you updated.  |
|
| |
|
|
|
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
© 2001, 2002 phpBB Group
|
|
 |