OZ ATV :: The Australian ATV Forum

[fredom]

hi everyone just registered as a member here at oz atv and was wondering if anyone can give me the best upgrades to do on my banshee, its totally stock at the moment and in peices cos it got dusted (not my fault ) im aboiut to rebuild it and wanna do it right and get more power out of it any info would be great my budget isn't real big at the moment either

[4stroker]

im sure you would know this by now but the very first thing you should do is fit a pro design or similar filter mount and a decent filter like a K&N.

The stock set up is absolute rubbish and this is probably why your motor got dusted!

next up is a set of pipes the most common are FMF ssts but there are other good ones such as Toomey T5s DMC alien or pro circuit. There are actually a THOUSAND more brands of pipes for the banshee but they r the most common in australia.

the next good cheap mod you can do is get a different fly wheel key from JMC racing (or others) which advances your ignition timing by 3 degrees.

while your engine is being rebuilt i would get someone to machine the head for slightly higher compression as well, this is a fairly common mod for the banshee, is cheap and should wake the motor up a bit.

then get it jetted right to suit those mods on good fuel (bp ultimate) and youll be happy as larry!

shouldnt cost more than like $1600 to get all that stuff on your bike and jetted.

speak to Zak at explosive racing (www.explosiveracing.com.au) about the mods he gave me a good price on a set of pipes for my mates quad.

have fun, mark.

[PeteW]

fredom wrote:

hi everyone just registered as a member here at oz atv and was wondering if anyone can give me the best upgrades to do on my banshee, its totally stock at the moment and in peices cos it got dusted (not my fault ) im aboiut to rebuild it and wanna do it right and get more power out of it any info would be great my budget isn't real big at the moment either

If your on a budget you should look at the basics first, Pipes, Filter, Jetting, this will give you a base to work from, If you plan on going any further with the engine than you should look at a better hadling set up before you do any more work after that. Feel Free to give us a call on 0419 001 747. Cheers Pete
_________________


www.thumbpump.com
www.dirtcomp.com.au