 |
|
|
|
|
|
|
|
|
|
Eddy_03Banshee
Blaster class
Joined: 16 Aug 2009
Posts: 118
|
 Posted: Wed Jun 09, 2010 6:02 pm Post subject: Banshee wont start |
  |
|
Hey i put a tors removal kit on my bike and now wont start. will if i tow start it and wont run at low revs. would the niddles be sitting too high
_________________
Just wanna go fast
05 Pred 500
03 Banshee
08 Raptor 250 |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
doorslammer
Roostin Away
Joined: 24 Jul 2007
Posts: 902
Location: Northern WA
|
| Posted: Wed Jun 09, 2010 8:07 pm Post subject: |
|
|
| are the slides in the right way? |
|
| |
|
|
|
|
|
|
|
|
Eddy_03Banshee
Blaster class
Joined: 16 Aug 2009
Posts: 118
|
| Posted: Wed Jun 09, 2010 9:01 pm Post subject: carb |
|
|
only go one way they sit right down
_________________
Just wanna go fast
05 Pred 500
03 Banshee
08 Raptor 250 |
|
| |
|
|
|
|
|
|
|
|
doorslammer
Roostin Away
Joined: 24 Jul 2007
Posts: 902
Location: Northern WA
|
| Posted: Wed Jun 09, 2010 9:12 pm Post subject: Re: carb |
|
|
| Eddy_03Banshee wrote: | | only go one way they sit right down |
wrong, you can put the standard slides in backwards without noticing and it wont idle correctly, but will run ok at higher rpms. i've done it.
also without tors how did you set the idle? have you drilled and tapped holes for idle screws? |
|
| |
|
|
|
|
|
|
|
|
Eddy_03Banshee
Blaster class
Joined: 16 Aug 2009
Posts: 118
|
| Posted: Wed Jun 09, 2010 9:26 pm Post subject: carb |
|
|
i put them in backwards and they dont sit down
_________________
Just wanna go fast
05 Pred 500
03 Banshee
08 Raptor 250 |
|
| |
|
|
|
|
|
|
|
|
doorslammer
Roostin Away
Joined: 24 Jul 2007
Posts: 902
Location: Northern WA
|
| Posted: Wed Jun 09, 2010 9:43 pm Post subject: |
|
|
if you put the left slide in the right carb they only go in backwards 
also as i said before, how is the idle setup, did you drill and tap for idle screws?
and refresh my memory, do the standard needles have multiple grooves? |
|
| |
|
|
|
|
|
|
|
|
4stroker
Joined: 15 Jan 2007
Posts: 1420
Location: North Queensland
|
| Posted: Wed Jun 09, 2010 10:21 pm Post subject: |
|
|
have you disconnected the little black box under the fuel tank? opposite side to the coil
_________________
2002 SE Banshee |
|
| |
|
|
|
|
|
|
|
|
Eddy_03Banshee
Blaster class
Joined: 16 Aug 2009
Posts: 118
|
| Posted: Thu Jun 10, 2010 9:16 pm Post subject: carb |
|
|
yeah done that
_________________
Just wanna go fast
05 Pred 500
03 Banshee
08 Raptor 250 |
|
| |
|
|
|
|
|
|
|
|
4stroker
Joined: 15 Jan 2007
Posts: 1420
Location: North Queensland
|
| Posted: Fri Jun 18, 2010 9:53 am Post subject: |
|
|
did ya fix it?
_________________
2002 SE Banshee |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
