OZ ATV :: The Australian ATV Forum

[Raptor700Matt]

hi guys
i just installed a streamline billetanium stabilizer on the raptor mounted as the instructions said, and set it at 5 clicks from soft.
just wondering where every1 else mounts theirs to stop from getting damaged and what settings u use.














[IMG]
cheers matt
_________________
Raptor700Matt
2010 Raptor 700 SE
2011 450R SE
2011 Raptor 90 x2

Thanks Bikes N Gear WHYALLA

[fossil800R]

Mine is mounted in the same spot but i have mine set a fair bit harder. Have you got any more pics?...LOL
_________________
I'm not suffering from insanity, I'm enjoying it!!!

[hustleratv.com.au]

here is one i fitted today on a blaster.






_________________
hustleratv.com.au 0407 797 780
Importer of OMF performance product / wheels
Maxxis Tyres
Boundless Suspention
Bad Boy Power Drinks

[Raptor700Matt]

sweet instruction said 4 mine on right side as u face the quad did u mount it where was best suited
_________________
Raptor700Matt
2010 Raptor 700 SE
2011 450R SE
2011 Raptor 90 x2

Thanks Bikes N Gear WHYALLA

[JRE]

maybe your one is for USA market, made for LHD quads

[Raptor700Matt]

i knew there had 2 b a comedian out there some where john
_________________
Raptor700Matt
2010 Raptor 700 SE
2011 450R SE
2011 Raptor 90 x2

Thanks Bikes N Gear WHYALLA

[hustleratv.com.au]

Tizmeraptor700 wrote:

sweet instruction said 4 mine on right side as u face the quad did u mount it where was best suited

what instructions i just fitted it the best way it would fit.
_________________
hustleratv.com.au 0407 797 780
Importer of OMF performance product / wheels
Maxxis Tyres
Boundless Suspention
Bad Boy Power Drinks

[Raptor700Matt]

i should of done what any normal bloke does throw instructions in tha bin hey dom
_________________
Raptor700Matt
2010 Raptor 700 SE
2011 450R SE
2011 Raptor 90 x2

Thanks Bikes N Gear WHYALLA

[Noy Q75]

i dont want to put a bad taste in your mouth but you have gone and spent $$$$ on fox shocks and A arms etc and then you went cheap on your steering dampner ?? i went through 3 of this type in a year for some reason they dont like the harsh tracks in aus . my mate also got the same one from the USA and 2 races later when he when to stiffen up the the damper a touch it locked up . but one click off and it was ok (and no it wasnt at its tighten end) so all im saying is if that dampner works and dosnt stuff up on you Well done but if it dose stuff up on you spend the extra money on a better brand like elka system3 there not to costly and do a good job i used one and never had a issue . but i also use a PEP one now and iv had it 2 years and has never let me down. but be carfull if you do go a PEP coz so people have a massive mark up on them just by ringing around i found a $200 diffrence

P.S. nice bike i love the good ol Raptors . when i stop racing im getting me another one of them
_________________
Sponsors ,Cullys Yamaha,Pirtek Malaga
2x YFZ 450r "09" 2x 90 Raptor "09"2x 125Raptors "12"
N# 1 Aus Quad Nats Vets 2010
N# 1 at BSA-HD for 09,10,11
N# 2 W.A. State Clubman A 2010
N# 3 W.A. State Vets 2011
N# 1 W.A. State Vets 2012

[Raptor700Matt]

thanks 4 your opinion
just went with what was recommended
if any1 else has any thoughts jut bring it
cheers matt
_________________
Raptor700Matt
2010 Raptor 700 SE
2011 450R SE
2011 Raptor 90 x2

Thanks Bikes N Gear WHYALLA

[tez700xx]

hey guys at the risk of sounden dopey ,
does the steering dampner take some of the vibration or jolt off the steering .maybe like power steering off a car

cheers
Tezza
+

[hustleratv.com.au]

tez700xx wrote:

hey guys at the risk of sounden dopey , does the steering dampner take some of the vibration or jolt off the steering .maybe like power steering off a car cheers Tezza +

yes they do.

when running +3 roll design a-arm with 4x1 offset fronts the bump steer wont be as bad as other set ups.

I have sold a few of the dampers with no problems some are a few years old now and you can rebuild these aswell.

the old push rod type (black ones) there were a few diffenent types aswell .some were good some were chinese copy's and would leak after the first 5mins. I still have one of the good black ones on my 250r, 5 years old ,but the geometery on the r is the best. if i ever replaced it i would use a steamline one.


the cost differents would be about elka etc $895 these $330.
_________________
hustleratv.com.au 0407 797 780
Importer of OMF performance product / wheels
Maxxis Tyres
Boundless Suspention
Bad Boy Power Drinks

[Raptor700Matt]

u tha man dom
_________________
Raptor700Matt
2010 Raptor 700 SE
2011 450R SE
2011 Raptor 90 x2

Thanks Bikes N Gear WHYALLA

[JONO]

hustleratv.com.au wrote:

here is one i fitted today on a blaster.

Another watercooled blaster i see there by the looks of it. Got any more photos?

[hustleratv.com.au]

yes , these are b4 the pipe, a-arms and shox were put on.

that thing on the handle bars is a temp gauge, I was told they could run hot thats why i put two radiators on it too. It was a fun project to do and it run awsome.








_________________
hustleratv.com.au 0407 797 780
Importer of OMF performance product / wheels
Maxxis Tyres
Boundless Suspention
Bad Boy Power Drinks

[NeKeleC]

$895 for a elka steering dampner!!!! that's why most people buy from the states I brought my precision dampner from the states for just under $600AUD delivered to my front door. As someone else saud pays to shop around save yourself big bucks!!!!!
_________________
The main thing is to have fun I just think second place is no fun

Me - 09 Quadracer 450R No 339
Mrs -09 Quadracer 450R No K77

[Overlord]

Folks you all got ripped the CCP Dampner out of the States can not be beaten $200 to your door had one 12 months not one problem and no its not a piston dampner.

Regards Overlord

[hustleratv.com.au]

NeKeleC wrote:

$895 for a elka steering dampner!!!! that's why most people buy from the states I brought my precision dampner from the states for just under $600AUD delivered to my front door. As someone else saud pays to shop around save yourself big bucks!!!!!

well thats why we have no atv mag now days. i dont import the dampeners so i dont set the RRP.

But i do have the best prices for maxxis tyres ,

I support those that support my business and they get there moneys worth everytime. thats why they come back again and again and again
_________________
hustleratv.com.au 0407 797 780
Importer of OMF performance product / wheels
Maxxis Tyres
Boundless Suspention
Bad Boy Power Drinks

[NeKeleC]

I'm hearin you hustler and i would have happily brought the dampners local had i been given a realistic price and time frame unfortunatley the distributors are makin way too much money off things.
If i had been able to get them for around the $700 mark and in a reasonable time i would have brought them locally but to be told $900 and about two weeks or more i said to myself why wait 2 + weeks and spend $300 per item more (i brought two that's $600 saving) when i can order online and not have to go collect them.
So when the distributors (not the guys at the shops on the front line, i know their getting shafted too) pull their finger out and get realistic people will go back to the shops and everybody will win.
And yes i do support the local guy when it comes to things that are hands on (bike work) which is where he makes his money anyway
_________________
The main thing is to have fun I just think second place is no fun

Me - 09 Quadracer 450R No 339
Mrs -09 Quadracer 450R No K77

[hustleratv.com.au]

cheers all good, dont know what the mark up is but i do import OMF wheels and theres not a huge margin ,so i cant really offer a dealer margin. I just sell direct to the public.

there are alot of fees and charges when you import $10,000 or more like GST, customs, freight etc etc. it all adds up.
_________________
hustleratv.com.au 0407 797 780
Importer of OMF performance product / wheels
Maxxis Tyres
Boundless Suspention
Bad Boy Power Drinks

[Raptor700Matt]

it ok dom the service u provided me dom i dont mind throwing a little extra cash ur way m8
_________________
Raptor700Matt
2010 Raptor 700 SE
2011 450R SE
2011 Raptor 90 x2

Thanks Bikes N Gear WHYALLA

[hustleratv.com.au]

Tizmeraptor700 wrote:

it ok dom the service u provided me dom i dont mind throwing a little extra cash ur way m8

so does the tax man lol
_________________
hustleratv.com.au 0407 797 780
Importer of OMF performance product / wheels
Maxxis Tyres
Boundless Suspention
Bad Boy Power Drinks

[trxtas]

precision pro dampner 900 here in aus 650 on my door from usa

[Noy Q75]

PEP damper for my 450r over east $499 , from the bike shop i go to $299 and thats here in aus so there is a large margin on price and i know the shop i go to got there dampners from over east as well so make secne with that ?? and thats the rrp from both places . so as i said shop around coz even over here in aus there is a big diffrence in $$$
_________________
Sponsors ,Cullys Yamaha,Pirtek Malaga
2x YFZ 450r "09" 2x 90 Raptor "09"2x 125Raptors "12"
N# 1 Aus Quad Nats Vets 2010
N# 1 at BSA-HD for 09,10,11
N# 2 W.A. State Clubman A 2010
N# 3 W.A. State Vets 2011
N# 1 W.A. State Vets 2012