 |
|
|
|
|
|
|
|
|
|
tbo100
50cc nipper
Joined: 28 May 2009
Posts: 24
Location: Sydney
|
 Posted: Wed Mar 10, 2010 8:42 pm Post subject: hot cams or Cam mod |
  |
|
Hi all. Just after a few opinions. I've got a Yfz with 478 bore, ported and over sized valves. I have a set of hot cams in right now but was wondering if I should change it to the cam mod. I've never had the cam mod so I can't compare them. Any advise will be welcomed
_________________
If it ain't dirty your not having fun |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
PeteW
Moderator
Joined: 09 Feb 2006
Posts: 1877
Location: Doreen, Vic
|
| Posted: Wed Mar 10, 2010 9:17 pm Post subject: |
|
|
If you've already got cams then you'd be going backwards to put the stock cams in and re-time them, the cam mod is really an almsot but not quite version of installing better cams without the expense.
_________________
www.thumbpump.com
www.dirtcomp.com.au |
|
| |
|
|
|
|
|
|
|
|
tbo100
50cc nipper
Joined: 28 May 2009
Posts: 24
Location: Sydney
|
| Posted: Wed Mar 10, 2010 9:21 pm Post subject: |
|
|
Is there any difference in the way power comes on
_________________
If it ain't dirty your not having fun |
|
| |
|
|
|
|
|
|
|
|
bigjon
Moderator
Joined: 17 Feb 2006
Posts: 1279
Location: Dubbo
|
| Posted: Wed Mar 10, 2010 9:29 pm Post subject: |
|
|
| tbo100 wrote: | | Is there any difference in the way power comes on |
No. The cam-mod are for cheap @rses like me.
Like Pete said, your going backwards if you take out your Hot Cams.
_________________
Don't close your eyes during the crash, you'll miss the best part |
|
| |
|
|
|
|
|
|
|
|
PeteW
Moderator
Joined: 09 Feb 2006
Posts: 1877
Location: Doreen, Vic
|
| Posted: Thu Mar 11, 2010 7:39 pm Post subject: |
|
|
| tbo100 wrote: | | Is there any difference in the way power comes on |
it will come on a bit softer than with the Hot Cams if you went back to the YFZ cams with the YZ cam mod but not much.
_________________
www.thumbpump.com
www.dirtcomp.com.au |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
