OZ ATV :: The Australian ATV Forum

[Ceewhy]

05 Honda TRX 450R $15000
This bike has it all, it is a replica of Tim Farrs 05 Factory Honda running the same factory spec PEP ZPS suspension all round with a Laeger Pro-Trax front end with Billet Baldwin Motorsports twin bearing front hubs and a Laeger +3/4 inch swing-arm on the rear with a Baldwin motorsports Billet twin row bearing carrier and a Baldwin Anti-Fade lock nut with a Lonestar +2 axle and Lonestar Billet Hubs, the rims on the rear are Douglas 8 inch Billet Beadlocks and Douglas Red Label 10 inch front rims with ITP Holeshots. The engine has a Shaved 14:1 Wiseco Hi-Comp piston with a Factory Honda head ported in the USA by Tim Farrs factory mechanic Mark Baldwin with Titanium valves and stiffer valve springs which has a Baldwin Moto-X factory spec cam, it also has a custom fitted CRF 450 flat slide carburetter breathing thru a Pro Design K&N Pro-Flow Air Cleaner Kit amd a full Curtis Sparks exhaust system, the ignition is a 10 program Vortex with a 2 stage switch on the bars to swap between maps on the move. The bars are Tag Fat bars mounted on a +2' Laeger steering stem and clamped in by a Billet Baldwin Bar clamp with a built in Kill Switch mount which also runs a Precision Steering Dampner, Also the clutch lever and bracket is a Works Connection On-The-Fly adjustment and also running a modified Suzuki Thumb throttle for easier use.
On the body side of things it has geniuine Honda Black Plastics with spare new guards and also a complete set of brand new red plastics as well, a carbon fibre nose cone, an oversize Baldwin rear brake pedal with a Pro Design billet gear lever, AC Pro-peg Nerf Bars. There is more on this bike as well but no expense has been spared on it, its build cost was over $36,000. I have just put another shaved piston & rings in sent over from the USA and it has done approx 4hrs. It also comes with another 2 sets of rims and tyres as well as another 2 sets of brand new rear holeshots and also a set of front hole shots. All the original parts that came off it which are brand new as this bike was pulled apart straight out of the crate stripped and rebuilt, these parts include a brand new head complete with valves, new original carby, original swingarm complete with bearing carrier and axle, the original suspension, A-arms, a spare fuel tank, front hubs and much much more.

I am getting out of racing quads and all parts will go with the bike hence the slightly higher price, I do not have to sell this bike as will keep riding it but feel it would be better used by someone to wants to race and have a seriously competitive bike. For anymore info on this feel free to ring me on 0417 963 663. I have photos which can be emailed on request

[rc]

pics to rickstephens78@gmail.com
chers rick also in perth

[patto901]

pics to pattosa7@hotmail.com thanks
_________________
thanks too pinn it ind,pillfreak racing,crushtex,scott smith earth moving,ktm,sa cranes,matty and brad my pit monkeys