 |
|
|
|
|
|
|
|
|
|
forwheel
50cc nipper
Joined: 14 Dec 2009
Posts: 16
Location: sydney
|
 Posted: Wed Dec 23, 2009 9:48 am Post subject: coolhead 20cc domes ,do i need to weld my crank |
  |
|
| would i need to weld my crank if i ran 20cc domes ? and would 98 octane be ok to run with this setup? |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
4stroker
Joined: 15 Jan 2007
Posts: 1420
Location: North Queensland
|
| Posted: Thu Dec 24, 2009 3:35 pm Post subject: |
|
|
no to welded crank and yes 98 fuel ok
_________________
2002 SE Banshee |
|
| |
|
|
|
|
|
|
|
|
4stroker
Joined: 15 Jan 2007
Posts: 1420
Location: North Queensland
|
| Posted: Thu Dec 24, 2009 3:36 pm Post subject: |
|
|
actually if they are pro design domes then im not so sure on the fuel being ok... if they are noss then you can run up to 19cc with only 98 octane fuel
_________________
2002 SE Banshee |
|
| |
|
|
|
|
|
|
|
|
forwheel
50cc nipper
Joined: 14 Dec 2009
Posts: 16
Location: sydney
|
| Posted: Thu Dec 24, 2009 4:38 pm Post subject: 20cc domes |
|
|
| thanks for the info, just out of interest what would be the difference with pro's and noss 20cc , would'nt the compression ratio still be the same? |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
