 |
|
|
|
|
|
|
|
|
|
Shawn
Blaster class
Joined: 16 Aug 2008
Posts: 175
Location: Central Coast
|
 Posted: Mon May 04, 2009 8:01 pm Post subject: 84 ATC 250R Brakes |
  |
|
After the front & rear brake calipers & master cylinders.
_________________
Raptor 700R 09' |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
Jamie
Moderator
Joined: 27 Aug 2006
Posts: 749
Location: somewhere
|
| Posted: Mon May 04, 2009 8:15 pm Post subject: |
|
|
ahh why need brakes?? the aircooler R's run good with no brakes... 
you could try ebay and start signing upto 3wheeler sites and looking for parts on there.
3wheelerworldforums.com
http://www.3wheeler.org/vb/index.php
airfoolers.com/forum |
|
| |
|
|
|
|
|
|
|
|
Aussieduner
Moderator
Joined: 05 Sep 2006
Posts: 1458
Location: New South Wales
|
| Posted: Mon May 04, 2009 8:52 pm Post subject: |
|
|
Shawn you may want to look at calipers from some of the newer quads and adapt them to your trike i know HondaGrant used brake parts from a Chinese made quad on his 200x.
_________________
1989 TRX 250R |
|
| |
|
|
|
|
|
|
|
|
ForeverThreeWheels
The Day Starts With OZATV !
Joined: 18 Nov 2008
Posts: 1742
Location: Maitland
|
| Posted: Tue May 05, 2009 7:35 pm Post subject: Re: 84 ATC 250R Brakes |
|
|
| Shawn wrote: | | After the front & rear brake calipers & master cylinders. |
Riding with them is like riding with a quad rider..... They'll only slow you down!!! I'd watch Aussieduners advice too, he seems to be spending an unhealthy amount of time around quads.    . 
_________________
 |
|
| |
|
|
|
|
|
|
|
|
Oldrodder
Roostin Away
Joined: 14 May 2007
Posts: 731
|
| Posted: Tue May 05, 2009 7:45 pm Post subject: 400EX |
|
|
The calipers from the 400EX and 450R's look like they will fit.
Even the ones on Banshees and other brand quads all look similar. |
|
| |
|
|
|
|
|
|
|
|
ForeverThreeWheels
The Day Starts With OZATV !
Joined: 18 Nov 2008
Posts: 1742
Location: Maitland
|
| Posted: Thu May 07, 2009 1:13 pm Post subject: |
|
|
The '83-'85 200X front caliper, line and perch can be used too on the front of the '83/'84R. I believe they are the same part.
For the rear you can use the rear brake master cylinder off a 400EX.
It requires drilling out the mounting holes in the master cylinder to 3/8" diameter, and this allows just the perfect movement to place the cylinder in there good and tight. I run the rear master cylinder off an '84 RZ250 on my rear. 
_________________
|
|
| |
|
|
|
|
|
|
|
|
Shawn
Blaster class
Joined: 16 Aug 2008
Posts: 175
Location: Central Coast
|
| Posted: Thu May 07, 2009 7:51 pm Post subject: |
|
|
Thanks for the advice fellas. Going to Gosford Motorcycle Wreckers on Monday to have a scavenge see what I can find or adapt.
_________________
Raptor 700R 09' |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
