twinrock
90cc 2 stroke / 110 4 stroke
Joined: 03 Jul 2007
Posts: 76
 |
 Posted: Mon Feb 09, 2009 11:19 pm Post subject: 2 stroke end cans with pic |
  |
|
hey guys i have had some end cans made up for my personal use and have some left over and can have more made up they are fully serviceable with both ends being fitted with a machined cap which fastened with nice button hex head 6mm bolts the units are fully aluminum with the exception of the inner baffle sleeve they come already packed and the front end has 2 6mm threaded holes for bolting them on to your chamber.. these are not slip on u will need to have a connecting disc the same diameter as the end can so u can bolt it on..these were made with the application of racing, dirt and street they are very strong and will take quite a bit of road rash before replacing,because of this they are a lil heaver, the fasteners have been placed on the out side to also help protect against road rash..they come polished and finished as u see dimensions are 220mm long 64mm o/d and 27mm i/d
only $80 each pm or call 0406726252 thanks
http://s36.photobucket.com/albums/e47/twinrock/?action=view¤t=forsale004.jpg |
|
