 |
|
|
|
|
|
|
|
|
|
rob
50cc nipper
Joined: 07 Jul 2008
Posts: 26
Location: korumburra
|
 Posted: Sun Aug 03, 2008 10:22 pm Post subject: steering stem |
  |
|
hi all great racing at toolleen today........just wondering does any one know a rough price on steering stem to fit a yfz 450 had a bit of a roll over today factory stem dident like it to much....
CHEERS ROB 65.................. |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
The Two Stroke Smoker
Roostin Away
Joined: 03 Jul 2007
Posts: 541
Location: mid pack
|
| Posted: Mon Aug 04, 2008 8:22 am Post subject: JMC Racing Anti vibe stem |
|
|
John at JMC racing www.jmcracing.com.au has anti vibe stems at good prices. Also try Scott at ATVs Unlimited 0408298600 he has stock and aftermarket parts as well.
I think you will be looking at around $90 for stock and up to $600 aftermarket.
Happy hunting
James
_________________
YFZ450
And the longest hours I've had in my life
Were the ones I went through to know I was right
So I'm safe but I'm a little outside
I'm gonna laugh when I'm buried alive |
|
| |
|
|
|
|
|
|
|
|
rob
50cc nipper
Joined: 07 Jul 2008
Posts: 26
Location: korumburra
|
| Posted: Mon Aug 04, 2008 10:19 am Post subject: |
|
|
THANKS JAMES OFF OVER TO WORK AND SEE WHAT COST PRICE FOR ME WILL BE FOR STOCK OR AFTER MARKET MIGHT HAVE TO GO STOCK AND GET TWO IF THAT PRICE.. STEM DIDENT STRAIGHTEN TO WELL BEING HIT BY HAMMER IN ANGER 
CHEERS ROB 65 |
|
| |
|
|
|
|
|
|
|
|
cammoquad
4fiddy Racer
Joined: 09 Aug 2007
Posts: 262
Location: Lewiston
|
| Posted: Mon Aug 04, 2008 5:29 pm Post subject: |
|
|
If your handy with a welder get yourself some crome molly tube
make a jig to keep mounts in same place (make the jig slide if you want to go +2)
measure up your tube weld it in
a cheaper way to repair if you got the tools to do it
i think yfz is 40mm tube from memory
its called racing on a budget you'll be amazed what you can come up with
_________________
THANKS TO ALL WHO HAVE ASSISTED MY FAMILY IN THERE RACING OVER LAST FEW YEARS |
|
| |
|
|
|
|
|
|
|
|
rob
50cc nipper
Joined: 07 Jul 2008
Posts: 26
Location: korumburra
|
| Posted: Mon Aug 04, 2008 6:20 pm Post subject: |
|
|
YEP ITS ON A BUDGET SO MIGHT TRY WITH OLD STEM AND USE THE SPLINE AND BAR MOUNT .
CHEERS ROB 65 |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
