 |
|
|
|
|
|
|
|
|
|
Travy
90cc 2 stroke / 110 4 stroke
Joined: 07 Oct 2007
Posts: 79
Location: Irymple, Vic
|
 Posted: Tue Jun 24, 2008 5:21 pm Post subject: EOI at this stage... banshee in bits.. |
  |
|
Am after expressions of possible interest.
Heres what i have..
Banshee.. i think 2000 model.. (pic before it blew up.. and with FMF pipes which i no longer have) its not perfect but its in pretty good condition.
engine is blown and in bits..
I have brand new Hot rods 5mm long rod crank, .080 wiseco 795 series pistons, seals gaskets etc. (pics attached)
Brand new bare toomey T5 exhaust. (pics attached)
The banshee came with nerfs and k&n powerlid when i bought the bike.
Also has pro-armour frame skid plate thats about 3 rides old.
Terry cable TORS removal kit which is 2 rides old..
Also have a standard front bar for it that i havent put on as i dont really like the one thats on there lol.
Im looking at selling it all together but in parts.. I know its a bit of a pain but I'd rather the new owner build it with their own choice of engine builder than me get someone here to build it only to have it sit until someone buys it.
In my opinion.. to get the most out of the motor the new owner would need to get some after market reeds and an adjustable timing plate and also the carbies need to be jetted to suit, there is currently no main jets although i have some 350's here not sure if they are best for the build though...
Only other thing it needs in my opinion is a new clutch lever with out the parkbrake stuff as i just got a park brake block off and have taken off the old parkbrake stuff.
there are a couple of bolts/screws that need replacing when reassembled as a couple were stripped by previous owner. Front tyres are ordinary also.
Id be looking for $3750.. plus freight to be organised by buyer if needed..
Owes me a lot more 
bike is located in Mildura, Victoria.
_________________
If this message creates confusion, my work here is done. 
My Quad: Banshee..  |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
Travy
90cc 2 stroke / 110 4 stroke
Joined: 07 Oct 2007
Posts: 79
Location: Irymple, Vic
|
| Posted: Tue Jul 01, 2008 1:17 pm Post subject: |
|
|
those that asked, im not interested in separating parts sorry.
_________________
If this message creates confusion, my work here is done.
My Quad: Banshee.. |
|
| |
|
|
|
|
|
|
|
|
fredom
90cc 2 stroke / 110 4 stroke
Joined: 25 Mar 2007
Posts: 66
Location: mildura
|
| Posted: Tue Jul 01, 2008 8:59 pm Post subject: |
|
|
| IS THAT YOU RIDIN IT I DONT REMEMBER YOU EVER GETTIN SIDEWAYS |
|
| |
|
|
|
|
|
|
|
|
Travy
90cc 2 stroke / 110 4 stroke
Joined: 07 Oct 2007
Posts: 79
Location: Irymple, Vic
|
| Posted: Wed Jul 02, 2008 6:59 am Post subject: |
|
|
| fredom wrote: | | IS THAT YOU RIDIN IT I DONT REMEMBER YOU EVER GETTIN SIDEWAYS |
oh blah blah lmao
_________________
If this message creates confusion, my work here is done.
My Quad: Banshee.. |
|
| |
|
|
|
|
|
|
|
|
gearb0x
50cc nipper
Joined: 02 Jul 2008
Posts: 9
|
| Posted: Wed Jul 02, 2008 9:26 am Post subject: |
|
|
| Is the motor actually appart? what let go? |
|
| |
|
|
|
|
|
|
|
|
Travy
90cc 2 stroke / 110 4 stroke
Joined: 07 Oct 2007
Posts: 79
Location: Irymple, Vic
|
| Posted: Wed Jul 02, 2008 12:47 pm Post subject: |
|
|
motor is apart.. the bearing on the rod that attaches to the crank has "profanity removed" itself, the rod is sloppy and jiggles up and down. there is damage to the pistons.. . hence why i bought the long rod and new pistons etc
as fas as i know the head looks fine.
If any one one thats genuinely interested in the bike (i have replied to all pm's so far  ) i can take more pics of any specific parts.. however please dont waste my time if you arent interested in purchasing the bike..
_________________
If this message creates confusion, my work here is done.
My Quad: Banshee.. |
|
| |
|
|
|
|
|
|
|
|
4stroker
Joined: 15 Jan 2007
Posts: 1420
Location: North Queensland
|
| Posted: Wed Jul 02, 2008 1:19 pm Post subject: |
|
|
youve got all the parts there, why not slap it together and ask $5000 for it?
_________________
2002 SE Banshee |
|
| |
|
|
|
|
|
|
|
|
Travy
90cc 2 stroke / 110 4 stroke
Joined: 07 Oct 2007
Posts: 79
Location: Irymple, Vic
|
| Posted: Wed Jul 02, 2008 4:20 pm Post subject: |
|
|
| 4stroker wrote: | | youve got all the parts there, why not slap it together and ask $5000 for it? |
I will only be selling it and i dont want to get a builder here to build it.. mainly cos there isnt really anyone here i would trust to do the build..
and as they have shut down one of the riding places i used to go to and my other mates all sold their quads i wont be riding it again anytime soon.
Id love to keep it but there isnt anywhere close to ride now.
So i just want it gone as Id prefer someone else to enjoy it than to sit in pieces in the shed like it has for the past few months.
_________________
If this message creates confusion, my work here is done.
My Quad: Banshee.. |
|
| |
|
|
|
|
|
|
|
|
4stroker
Joined: 15 Jan 2007
Posts: 1420
Location: North Queensland
|
| Posted: Wed Jul 02, 2008 4:29 pm Post subject: |
|
|
furry muff
_________________
2002 SE Banshee |
|
| |
|
|
|
|
|
|
|
|
Travy
90cc 2 stroke / 110 4 stroke
Joined: 07 Oct 2007
Posts: 79
Location: Irymple, Vic
|
| Posted: Wed Jul 02, 2008 9:03 pm Post subject: |
|
|
at this stage its sold pending collection and payment
_________________
If this message creates confusion, my work here is done.
My Quad: Banshee.. |
|
| |
|
|
|
|
|
|
|
|
Travy
90cc 2 stroke / 110 4 stroke
Joined: 07 Oct 2007
Posts: 79
Location: Irymple, Vic
|
| Posted: Sat Jul 12, 2008 6:15 pm Post subject: |
|
|
Quad was collected today but a member off here 
mods can closed/delete thread.
_________________
If this message creates confusion, my work here is done.
My Quad: Banshee.. |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
