 |
|
|
|
|
|
|
|
|
|
Todd 127
The Day Starts With OZATV !
Joined: 12 Feb 2006
Posts: 1267
Location: Hawkesbury
|
 Posted: Wed Jun 11, 2008 6:03 pm Post subject: OUTLAW BANSHEE |
  |
|
This bike was built from the ground up out of aftermarket parts and a few genuine Yamaha and Honda parts. The design of the bike makes it a great bike for all forms of racing, its chassis design allows it to take the Banshee plastic and motor then it runs all Honda A-arms, Swing-arm, suspension and Brakes. The bike has only been ridden 10 times since it was completed in 2005. No expense was spared to build this Banshee, to recreate this bike expect to spend over $40,000.00 see spec’s below
Lone Star Racing Parts: Outlaw Banshee Chassis, Chrome Long Travel A-arms, Swing-arm, Axle and Steering stem. Billet alloy front and rear wheel hubs, Sprocket and Disc hubs and bearing carrier.
Engine: Ported barrels bored 1mm oversize with Pro X pistons. Trued and welded 5mm long rod crank. Hinson 8 plate clutch basket, Inner hub and Pressure plate. Pro Design Cool Head, Pro Flow manifold and high flow water pump. Ricky Stator 200W Stator and hi output flywheel. V force reed cages. Keihin 33mm PWK carburetors. Paul Turner mid range pipes with Fat Boy silencers.
For more details contact Shane on 02 4353 3622 9am to 5pm Mon to Fri.
$19,500.00 ONO |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
triple"A"
Roostin Away
Joined: 04 Aug 2006
Posts: 941
|
| Posted: Wed Jun 11, 2008 7:23 pm Post subject: |
|
|
can you give me some more details on the engine and the mods done eg. dyno figures , comp ratio etc
is the crank just 5 mill rods or has it had other improvements
any info on the port job too would be good eg % of added opening, timing variations etc etc. |
|
| |
|
|
|
|
|
|
|
|
Todd 127
The Day Starts With OZATV !
Joined: 12 Feb 2006
Posts: 1267
Location: Hawkesbury
|
| Posted: Wed Jun 11, 2008 7:57 pm Post subject: |
|
|
| adelaideplantandequipment wrote: | can you give me some more details on the engine and the mods done eg. dyno figures , comp ratio etc
is the crank just 5 mill rods or has it had other improvements
any info on the port job too would be good eg % of added opening, timing variations etc etc. |
Sorry mate i have no idea.
Shane Hardiman owns the quad, i'm just advertisng it for him as he is doing a new project for ATV Action, so he needs to move his pride and joy along. And i have NEVER seen him ride it !!
Give him a call at work
02 43533622 Shane. |
|
| |
|
|
|
|
|
|
|
|
TUFF AS
Big Bore, Stroked & Bling +
Joined: 09 Jan 2007
Posts: 497
Location: sydney
|
| Posted: Wed Jun 11, 2008 8:13 pm Post subject: |
|
|
very nice almost like mine 
_________________
07 BANSHEE 91hp atw at the moment
04 WR450F still yet to know hp |
|
| |
|
|
|
|
|
|
|
|
4stroker
Joined: 15 Jan 2007
Posts: 1420
Location: North Queensland
|
| Posted: Thu Jun 12, 2008 6:38 am Post subject: |
|
|
very nice!
_________________
2002 SE Banshee |
|
| |
|
|
|
|
|
|
|
|
4stroker
Joined: 15 Jan 2007
Posts: 1420
Location: North Queensland
|
| Posted: Thu Jun 12, 2008 3:48 pm Post subject: |
|
|
it probably cost $40,000 back when the dollar was 55c compared to the US hey?
_________________
2002 SE Banshee |
|
| |
|
|
|
|
|
|
|
|
doorslammer
Roostin Away
Joined: 24 Jul 2007
Posts: 902
Location: Northern WA
|
| Posted: Thu Jun 12, 2008 8:35 pm Post subject: |
|
|
| 4stroker wrote: | | it probably cost $40,000 back when the dollar was 55c compared to the US hey? |
so if you were to do a similar project it would be a 20-25,000 dollar build?
_________________
01 Banshee
Never take life seriously. Nobody gets out alive anyway |
|
| |
|
|
|
|
|
|
|
|
Quad
The Day Starts With OZATV !
Joined: 22 Oct 2006
Posts: 2773
Location: UP FRONT
|
| Posted: Thu Jun 12, 2008 8:37 pm Post subject: |
|
|
| yep thats close its only got a std motor in it. |
|
| |
|
|
|
|
|
|
|
|
Todd 127
The Day Starts With OZATV !
Joined: 12 Feb 2006
Posts: 1267
Location: Hawkesbury
|
| Posted: Thu Jun 12, 2008 8:57 pm Post subject: |
|
|
| quad wrote: | | yep thats close its only got a std motor in it. |
Hey Darren, i'm posting this on here for Shane, if your not interested then i guess you have no reason to reply or two can play at your game........But i wouldnt want you to lose a sale if i told everyone what your Outlaw was ACTUALLY like !!!! |
|
| |
|
|
|
|
|
|
|
|
Quad
The Day Starts With OZATV !
Joined: 22 Oct 2006
Posts: 2773
Location: UP FRONT
|
| Posted: Thu Jun 12, 2008 9:10 pm Post subject: |
|
|
not bagging any one or thing just replying,
and when do you not say anything nice about whot i do or sell .i dont care i have no mates or freinds so i dont care. |
|
| |
|
|
|
|
|
|
|
|
Todd 127
The Day Starts With OZATV !
Joined: 12 Feb 2006
Posts: 1267
Location: Hawkesbury
|
| Posted: Thu Jun 12, 2008 9:18 pm Post subject: |
|
|
| quad wrote: | | yep thats close its only got a std motor in it. |
Standard engine specs......
Engine: Ported barrels bored 1mm oversize with Pro X pistons. Trued and welded 5mm long rod crank. Hinson 8 plate clutch basket, Inner hub and Pressure plate. Pro Design Cool Head, Pro Flow manifold and high flow water pump. Ricky Stator 200W Stator and hi output flywheel. V force reed cages. Keihin 33mm PWK carburetors. Paul Turner mid range pipes with Fat Boy silencers. |
|
| |
|
|
|
|
|
|
|
|
Roycroft
The Day Starts With OZATV !
Joined: 26 Aug 2006
Posts: 1512
Location: Newcastle
|
| Posted: Thu Jun 12, 2008 9:42 pm Post subject: banshee |
|
|
you know i have walked past that thing over atleast 1000 times
and everytime i still look closely at it and admire it.
once its gone i don't htink i will go there anymore.
i have never seen it moved in 3 years and it never seems to get dust on it, its that faaast.
_________________
2012 sponsors, Working on it. |
|
| |
|
|
|
|
|
|
|
|
morebloodymoney
90cc 2 stroke / 110 4 stroke
Joined: 30 May 2008
Posts: 92
Location: Mundubbera QLD.
|
| Posted: Fri Jun 13, 2008 4:04 pm Post subject: |
|
|
| That is one very nice banshee,I'd love to see a pro rider on that thing, I'm sure it would surprise a lot of people, looks very similar to what duncan racing used to enter in the pont de voux (not sure if thats how you spell it) but they alot of sucess with there banshee. |
|
| |
|
|
|
|
|
|
|
|
Quad
The Day Starts With OZATV !
Joined: 22 Oct 2006
Posts: 2773
Location: UP FRONT
|
| Posted: Fri Jun 13, 2008 6:23 pm Post subject: |
|
|
| its a pro rider on it hes a australia champion ,i have been told at the beach. |
|
| |
|
|
|
|
|
|
|
|
OZ_450
The Day Starts With OZATV !
Joined: 12 Feb 2006
Posts: 1631
Location: those who need to know knows :)
|
| Posted: Fri Jun 13, 2008 6:37 pm Post subject: |
|
|
i think he was meaning a racer Quad
_________________
black covered in 5.7 powered oversize quad
model vx ss 350 hahaha
enough bass to compensate for lack of skills
Empty Wallet Racing proudly on track for GM Motorsport  |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
