 |
|
|
|
|
|
|
|
|
|
looking
Big Bore, Stroked & Bling +
Joined: 11 Jul 2007
Posts: 335
|
 Posted: Mon May 05, 2008 10:38 pm Post subject: banshee clutch |
  |
|
ok
what is the main cause for the little bearing to weld its self onto the sharft?
easy fixed just want to know why..
thanks guys.
nick |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
greenhuman
Roostin Away
Joined: 12 Feb 2006
Posts: 980
|
| Posted: Mon May 05, 2008 11:13 pm Post subject: |
|
|
| No freeplay on the clutch pressure plate adjustment. |
|
| |
|
|
|
|
|
|
|
|
4stroker
Joined: 15 Jan 2007
Posts: 1420
Location: North Queensland
|
| Posted: Wed May 07, 2008 12:28 pm Post subject: |
|
|
sometimes with alot of power the only way to get the ball to stop welding itself to the rod is to run so much freeplay that the clutch doesnt dis-engage properly, making gear changes very hit and miss! the only way around this then is to buy an aftermarket pancake bearing.
on my rz motor i not only welded the ball to the rod but also the other end of the rod to the actuator, meaning i had to split the cases and grind it apart! fun fun....
_________________
2002 SE Banshee |
|
| |
|
|
|
|
|
|
|
|
looking
Big Bore, Stroked & Bling +
Joined: 11 Jul 2007
Posts: 335
|
| Posted: Thu May 08, 2008 7:51 pm Post subject: |
|
|
aftermarket pancake bearing sounds crazy
where can i get one from mate
thanks nick |
|
| |
|
|
|
|
|
|
|
|
Quad
The Day Starts With OZATV !
Joined: 22 Oct 2006
Posts: 2773
Location: UP FRONT
|
| Posted: Thu May 08, 2008 8:00 pm Post subject: |
|
|
whot is this its never happened to my motor ,clutch , ajdustment is right tested the clutch after a good year of moto riding ,racing.
measure the clutch plates 3mm new 2.98 mm ball ,rod fine.
so how duz this happen with correct free travel./ must be riding the clutch |
|
| |
|
|
|
|
|
|
|
|
ROOTS RACING
Big Bore, Stroked & Bling +
Joined: 10 May 2007
Posts: 344
|
| Posted: Sun May 11, 2008 7:16 pm Post subject: |
|
|
i can get them,
i run them on my banshee motors.
i had the same problem but now the pancake bearing is in it has never failed yet. i dont have them in stock but can get them . pm me if any one needs one.
_________________
Roots Racing ATV's
Home of Australia's FIRST TRIPLE CYL BANSHEE
www.rootsracing.com.au
ROOTS RACING# 0433255914 |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
