 |
|
|
|
|
|
|
|
|
|
yfz45O
50cc nipper
Joined: 10 Jun 2007
Posts: 33
Location: Mildura
|
 Posted: Tue Feb 26, 2008 3:17 pm Post subject: YFZ450 a-arms |
  |
|
| this might be a stupid question but will a set of yfz a-arms fit all years...? or were they changed etc... just read couple of places say 'fit all years' and others say '03to'05 and '06to'08.... |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
Quad Squad
Blaster class
Joined: 05 Apr 2007
Posts: 193
Location: Melbourne
|
| Posted: Tue Feb 26, 2008 4:37 pm Post subject: |
|
|
The A arms are all the same from 04-08, the difference was that in 06 the tie rod end thread was made bigger.
Where the tie rod end mounts to the spindle is the same, just the thread into the tie rod was enlarged.
if you have an 04/05 you can run 06-08 tie rods just by getting 06-08 tie rod ends.
Its also a good upgrade if you have problems with breaking tie rod ends
_________________
www.quadsquad.com.au
Follow us on Facebook http://www.facebook.com/atvracetechnology |
|
| |
|
|
|
|
|
|
|
|
yfz45O
50cc nipper
Joined: 10 Jun 2007
Posts: 33
Location: Mildura
|
| Posted: Tue Feb 26, 2008 4:44 pm Post subject: |
|
|
| ok sweet thanks man.... so where would i get 06-08 tie rod ends and you gotta guestimate how much it would cost me? |
|
| |
|
|
|
|
|
|
|
|
Quad Squad
Blaster class
Joined: 05 Apr 2007
Posts: 193
Location: Melbourne
|
| Posted: Tue Feb 26, 2008 4:55 pm Post subject: |
|
|
| secci wrote: | | ok sweet thanks man.... so where would i get 06-08 tie rod ends and you gotta guestimate how much it would cost me? |
They are an OEM part so any Yamaha dealer will be able to get them for you. They are around $50 each, depending on the dealer. Pricey but you wont bend them anywhere as easy as the 04/05 ends
_________________
www.quadsquad.com.au
Follow us on Facebook http://www.facebook.com/atvracetechnology |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
