 |
|
|
|
|
|
|
|
|
|
gammie89
4fiddy Racer
Joined: 15 Jun 2007
Posts: 265
Location: cairns QLD
|
 Posted: Tue Dec 04, 2007 7:28 pm Post subject: banshee flywheel |
  |
|
can you pull the flywheel off without the special puller that you can buy, or can you use a normal 2 or 3 leg puller? i heard using a normal puller will wreck the flywheel
if anyone has a picture of this special flywheel puller, can they post it up please as i have not seen what they look like
_________________
04 yfz450 |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
4stroker
Joined: 15 Jan 2007
Posts: 1420
Location: North Queensland
|
| Posted: Tue Dec 04, 2007 8:38 pm Post subject: |
|
|
do not use a normal puller!! you will bend the flywheel.
rattle the nut and get your bike shop to pull the flywheel, or shell out and buy the special puller. your yamaha shop should be able to get you one, or you can buy a universal one, most dirtbikes use the same puller.
prolly cost you about $50 from the bike shops, you can buy em for about $12 us though on ebay... just gotta pay shipping and wait for it
_________________
2002 SE Banshee |
|
| |
|
|
|
|
|
|
|
|
doorslammer
Roostin Away
Joined: 24 Jul 2007
Posts: 902
Location: Northern WA
|
| Posted: Tue Dec 04, 2007 9:36 pm Post subject: |
|
|
| 4stroker wrote: | do not use a normal puller!! you will bend the flywheel.
|
whoops
i used a three leg puller
i must be lucky cause it still runs...
wont be doing tha again than
_________________
01 Banshee
Never take life seriously. Nobody gets out alive anyway |
|
| |
|
|
|
|
|
|
|
|
OZ_450
The Day Starts With OZATV !
Joined: 12 Feb 2006
Posts: 1631
Location: those who need to know knows :)
|
| Posted: Tue Dec 04, 2007 9:42 pm Post subject: |
|
|
i got mine off aussie ebay hmm i dont really need it anymore as it dont fit the electric start 450s may work something out with ya
_________________
black covered in 5.7 powered oversize quad
model vx ss 350 hahaha
enough bass to compensate for lack of skills
Empty Wallet Racing proudly on track for GM Motorsport  |
|
| |
|
|
|
|
|
|
|
|
4stroker
Joined: 15 Jan 2007
Posts: 1420
Location: North Queensland
|
| Posted: Wed Dec 05, 2007 1:09 pm Post subject: |
|
|
| doorslammer wrote: | | 4stroker wrote: | do not use a normal puller!! you will bend the flywheel.
|
whoops
i used a three leg puller
i must be lucky cause it still runs...
wont be doing tha again than |
hmmm yes you are lucky...
two of my friends have bent flywheels now after trying to use a normal puller.
_________________
2002 SE Banshee |
|
| |
|
|
|
|
|
|
|
|
Hulk
Big Bore, Stroked & Bling +
Joined: 16 May 2007
Posts: 432
Location: Sydney
|
| Posted: Wed Dec 05, 2007 2:34 pm Post subject: |
|
|
oz_450 wrote.
| Quote: | | i got mine off aussie ebay hmm i dont really need it anymore as it dont fit the electric start 450s may work something out with ya |
how much would it cost with shipping to sydney 2192. |
|
| |
|
|
|
|
|
|
|
|
gammie89
4fiddy Racer
Joined: 15 Jun 2007
Posts: 265
Location: cairns QLD
|
| Posted: Wed Dec 05, 2007 6:21 pm Post subject: |
|
|
luckly a mate of mine found his so yeah i used that, i know why you would bend the flywheel now, real tight on the taper and they are all hollow behind it.
thanks
_________________
04 yfz450 |
|
| |
|
|
|
|
|
|
|
|
4stroker
Joined: 15 Jan 2007
Posts: 1420
Location: North Queensland
|
| Posted: Thu Dec 06, 2007 12:50 pm Post subject: |
|
|
just noticed in the ballards catalogue last night that they are only $29
shouldnt cost more then $5 to post they are tiny
_________________
2002 SE Banshee |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
