OZ ATV :: The Australian ATV Forum

[Quad]

NICE BLUE POWDER COAT JOB ASH

[cowchaser]

buzz.8 wrote:

OZ_450 wrote: think cowchaser and Azza were hitting round 165kmh mark at finke dont know how fast my stock banshee will go but i deffinatelly want to race the finke next year, i wouldnt have a clue whats involved in competing at this event but if any one else here is interested aswell let me know. organising as a group or something might make it a bit easier. ill be at frogmore tomorrow if anyone is coming. im from canberra by the way

Happy to help with any questions you have mate but if your from Canberra get in touch with Rick and Terri Beer they will be more than happy to point you in the right direction. They are from Queenbeain and go every year Rick has won it several times
_________________
Smitty

[WHATEVER]

mildgen wrote:

...i dont reckon a stock geard raptor would do 130..... i would have to be there to believe 165kmh

Agreed!!

I did just under 130km/h on my stock 660 with stock rubber!
_________________
Mikey got 3rd in the Nationals!!

It would not have been possible without the help of ...
Hustler ATV Racing
Thanks Dominic!!

[buzz.8]

cowchaser wrote:

buzz.8 wrote: OZ_450 wrote: think cowchaser and Azza were hitting round 165kmh mark at finke dont know how fast my stock banshee will go but i deffinatelly want to race the finke next year, i wouldnt have a clue whats involved in competing at this event but if any one else here is interested aswell let me know. organising as a group or something might make it a bit easier. ill be at frogmore tomorrow if anyone is coming. im from canberra by the way Happy to help with any questions you have mate but if your from Canberra get in touch with Rick and Terri Beer they will be more than happy to point you in the right direction. They are from Queenbeain and go every year Rick has won it several times

cheers ill send them a msg
_________________

[ashnery]

I just pulled 160kph with 240hp on a dyno and the gearing is way to tall..
I think some of you are kidding yourselfs on just how fast you think your going..
I have never been that fast on the sand before and im backing off in 5th after about a 3 second wot.

[dangerman4]

come on ash tuffen up a bit.
i was racing two xr650's in top gear and i was pulling away, so that confirms how fast i was going.
how can you compare doing 160 on a dyno to riding on sand or a paddock?

or did you mean it has 240hp on a dyno and you just did 160 on the sand?

dont get me wrong it is bloody quick.
so how did she feel other then that? yours would be a bit more progressive then mine so you can slowly wind it on. what's the lag like?
when are you seeing full boost?
my wife has a 350rwkw turbo skyline so i know a thing or to about turbo's

[bullet]

I reckon I was thinking the same way you were dangerman.
That a 1300 turbo in an off road dirt quad would struggle to use full boost.
The only time you'd get enough load at full throttle would have to be in the top gears. You'd need a kilometer of dead straight to get full boost for 2 seconds. But when he is pushing that top speed wall of wind, and the old snail starts doing it's job... man that thing will be hiking.

Your quads both look like really proffessional engineering, and I'm just jealous that I don't find the time to get out there and make my own monster.

Find yourselves a copy of a DVD called "The Britten Story" (I think thats the right name).
You'll love it. This Kiwi bloke builds a superbike and it kicks Dukes everwhere.
He also has a really interesting approach to aerodynamics. When they finished the bike they took it out with some timing gear and broke all the speed and acceleration world records at that time.
Really inspirational stuff.
_________________
Can-Am X Team
Bullet #Y12. MrsB #Y18.

[Derek R]

SIKMIC wrote:

Some guys did an all bitumen race on quads at Morgan Park in Warwick, I think nearly 2 years ago now. The were getting clocked at 170kph going into the first corner.

Hi Mic
Morgan Park Raceway (Warwick) labour day long weekend 2004, Qld Roadrace State Championships :-

Race 2 Derek Rumble clocked 177.47 kph on 350cc banshee at the end of pit straight (see M.Q. )

[SIKMIC]

Now someone just needs to get the quads there again so Dad or me can put this new banshee to use. It ended up on its lid last time before I even got a chance to see how it goes.
_________________
Mic

YFZ450
Thanks to ATV's Unlimited &
Luke Beechey Motorsports
mic902@hotmail.com

[Derek R]

SIKMIC wrote:

Now someone just needs to get the quads there again so Dad or me can put this new banshee to use. It ended up on its lid last time before I even got a chance to see how it goes.

Hi Mic
The bike that your dad has bought is the same bike that Stacy Sellar parked shinny side down and the same bike that I recorded the 177.47 kph a few race meetings later. But let me tell you, that it is certainly not anywere near the Quickest quad that I've thrown a leg over. ! ! ! !

Seeya

Derek R

[SIKMIC]

Derek R wrote:

SIKMIC wrote: Now someone just needs to get the quads there again so Dad or me can put this new banshee to use. It ended up on its lid last time before I even got a chance to see how it goes. Hi Mic The bike that your dad has bought is the same bike that Stacy Sellar parked shinny side down and the same bike that I recorded the 177.47 kph a few race meetings later. But let me tell you, that it is certainly not anywere near the Quickest quad that I've thrown a leg over. ! ! ! ! Seeya Derek R

I dont doubt you Derek. But on anythin other than mx it has a slight edge over the old 400.
_________________
Mic

YFZ450
Thanks to ATV's Unlimited &
Luke Beechey Motorsports
mic902@hotmail.com

[SIKMIC]

dylan wrote:

Personally I have only been about 65km/h on aquad but my dad has been up to around 180km/h on his sweet ass banshee at the warick bitchument track.

You numbnut. Ive told them. We have the same Dad remember.
_________________
Mic

YFZ450
Thanks to ATV's Unlimited &
Luke Beechey Motorsports
mic902@hotmail.com

[Derek R]

dylan wrote:

dereck ur a psyco thats why its not the fastest quad you've been.

Hi Dylan.......... Whats happening mate, and how many broken bones do you have today? or are you having a broken bone free period for a change.

Seeya

Derek R

[4stroker]

Derek R wrote:

SIKMIC wrote: Some guys did an all bitumen race on quads at Morgan Park in Warwick, I think nearly 2 years ago now. The were getting clocked at 170kph going into the first corner. Hi Mic Morgan Park Raceway (Warwick) labour day long weekend 2004, Qld Roadrace State Championships :- Race 2 Derek Rumble clocked 177.47 kph on 350cc banshee at the end of pit straight (see M.Q. )

to go that fast on a banshee with 20 inch tyres, it needs to do 11000rpm in sixth gear with 17/40 gearing.... how long is this straight? and how much horsepower does that banshee have??
_________________
2002 SE Banshee

[yogie]

A mate of mine near ballarat has a 100hp banshee, was clocked at 203 k's beleive or not, and anyone that knows SG and has seen his banshee go, would believe it.
_________________
2005 KFX700
With a few bells and whistles
and the twin yoshi's
American Star A-arms, tie rods
elka stickers
Shorty Shifter
I have a Waco
rossco gave me a flexx sticker
honda thumb
Great at climbing trees
durablue stickers

[SIKMIC]

4stroker wrote:

Derek R wrote: SIKMIC wrote: Some guys did an all bitumen race on quads at Morgan Park in Warwick, I think nearly 2 years ago now. The were getting clocked at 170kph going into the first corner. Hi Mic Morgan Park Raceway (Warwick) labour day long weekend 2004, Qld Roadrace State Championships :- Race 2 Derek Rumble clocked 177.47 kph on 350cc banshee at the end of pit straight (see M.Q. ) to go that fast on a banshee with 20 inch tyres, it needs to do 11000rpm in sixth gear with 17/40 gearing.... how long is this straight? and how much horsepower does that banshee have??

If I remember correctly, around 85. But Derek will probably correct me on that one. Not to sure.
_________________
Mic

YFZ450
Thanks to ATV's Unlimited &
Luke Beechey Motorsports
mic902@hotmail.com

[4stroker]

SIKMIC wrote:

4stroker wrote: Derek R wrote: SIKMIC wrote: Some guys did an all bitumen race on quads at Morgan Park in Warwick, I think nearly 2 years ago now. The were getting clocked at 170kph going into the first corner. Hi Mic Morgan Park Raceway (Warwick) labour day long weekend 2004, Qld Roadrace State Championships :- Race 2 Derek Rumble clocked 177.47 kph on 350cc banshee at the end of pit straight (see M.Q. ) to go that fast on a banshee with 20 inch tyres, it needs to do 11000rpm in sixth gear with 17/40 gearing.... how long is this straight? and how much horsepower does that banshee have?? If I remember correctly, around 85. But Derek will probably correct me on that one. Not to sure.

85hp??? does it have an aftermarket top end and 10mil crank?
_________________
2002 SE Banshee

[SIKMIC]

4stroker wrote:

SIKMIC wrote: 4stroker wrote: Derek R wrote: SIKMIC wrote: Some guys did an all bitumen race on quads at Morgan Park in Warwick, I think nearly 2 years ago now. The were getting clocked at 170kph going into the first corner. Hi Mic Morgan Park Raceway (Warwick) labour day long weekend 2004, Qld Roadrace State Championships :- Race 2 Derek Rumble clocked 177.47 kph on 350cc banshee at the end of pit straight (see M.Q. ) to go that fast on a banshee with 20 inch tyres, it needs to do 11000rpm in sixth gear with 17/40 gearing.... how long is this straight? and how much horsepower does that banshee have?? If I remember correctly, around 85. But Derek will probably correct me on that one. Not to sure. 85hp??? does it have an aftermarket top end and 10mil crank?

Dont think so. Derek, you built it, this question is for you.
_________________
Mic

YFZ450
Thanks to ATV's Unlimited &
Luke Beechey Motorsports
mic902@hotmail.com

[OZ_450]

4stroker wrote:

SIKMIC wrote: 4stroker wrote: Derek R wrote: SIKMIC wrote: Some guys did an all bitumen race on quads at Morgan Park in Warwick, I think nearly 2 years ago now. The were getting clocked at 170kph going into the first corner. Hi Mic Morgan Park Raceway (Warwick) labour day long weekend 2004, Qld Roadrace State Championships :- Race 2 Derek Rumble clocked 177.47 kph on 350cc banshee at the end of pit straight (see M.Q. ) to go that fast on a banshee with 20 inch tyres, it needs to do 11000rpm in sixth gear with 17/40 gearing.... how long is this straight? and how much horsepower does that banshee have?? If I remember correctly, around 85. But Derek will probably correct me on that one. Not to sure. 85hp??? does it have an aftermarket top end and 10mil crank?

i dont mean to sound rude but you are who 4stroker? and what is done to your banshee as you seem to think you know alot so you mu8st have a kickass banshee ?

Derek Rumble is very well known on speedway circuits with his claims and also his acheivements so i want to know who you are now 4stroker and if ya banshee isnt modded much how do you think you have the background to say whos is?
_________________
black covered in 5.7 powered oversize quad
model vx ss 350 hahaha
enough bass to compensate for lack of skills
Empty Wallet Racing proudly on track for GM Motorsport

[civic_lad]

ive had the TRX400ex 06 tapped out took a while and down hill i dont know what speed that was and chin was down on the tank.
all in good fun!

[4stroker]

lol pull ya head in mate i was just asking a question!
_________________
2002 SE Banshee

[OZ_450]

4stroker wrote:

lol pull ya head in mate i was just asking a question!

hmmm maybe you should is this asking read below what you said

4stroker wrote:

to go that fast on a banshee with 20 inch tyres, it needs to do 11000rpm in sixth gear with 17/40 gearing.... how long is this straight? and how much horsepower does that banshee have??!

then this

4stroker wrote:

85hp??? does it have an aftermarket top end and 10mil crank???!

they are statements so since ya asked seems you have no idea so maybe you should rethink what ya say lmao
_________________
black covered in 5.7 powered oversize quad
model vx ss 350 hahaha
enough bass to compensate for lack of skills
Empty Wallet Racing proudly on track for GM Motorsport

[Ozzy84]

ease up, seems like a legit couple of questions to me, im curious myself, 170kph is a huge call on a quad... would love to have seen it, done bout 110 (according to my GPS anyway...) on my raptor and i was packin darkies

85hp though, guess it has the sack to do it

[4stroker]

OZ_450 wrote:

4stroker wrote: lol pull ya head in mate i was just asking a question! hmmm maybe you should is this asking read below what you said 4stroker wrote: to go that fast on a banshee with 20 inch tyres, it needs to do 11000rpm in sixth gear with 17/40 gearing.... how long is this straight? and how much horsepower does that banshee have??! then this 4stroker wrote: 85hp??? does it have an aftermarket top end and 10mil crank???! they are statements so since ya asked seems you have no idea so maybe you should rethink what ya say lmao

lol not sure why youve got your nickers in a knot but whatever man ay!

hey derek what is the setup in that banshee? also can you remember what gearing you were running when you pulled 177?

i wasnt born with this knowledge lol so im asking!
_________________
2002 SE Banshee

[4stroker]

doesnt derek get on here much?

does anyone know what sort of motor is in that banshee?

i here derek is good with porting etc, does he do work for other people as well or just his own?
_________________
2002 SE Banshee