 |
|
|
|
|
|
|
|
|
|
Cj5350
50cc nipper
Joined: 23 Jun 2006
Posts: 21
Location: SYDNEY
|
 Posted: Thu Jul 27, 2006 9:45 pm Post subject: pro-taper high atv bend |
  |
|
Just tried to fit up some new pro taper High Atv Bend bars on my 06 YFZ only to realise that the 06 have a longer stem...now my cables are to short..
anyone running after market bars on a 06 YFZ??? |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
PeteW
Moderator
Joined: 09 Feb 2006
Posts: 1877
Location: Doreen, Vic
|
| Posted: Thu Jul 27, 2006 9:47 pm Post subject: |
|
|
I fitted up those High Pro tapers to an 06 with extra risers as well. You may need to do a bit of cable re-routing to get it to work for you though.
_________________
www.thumbpump.com
www.dirtcomp.com.au |
|
| |
|
|
|
|
|
|
|
|
Cj5350
50cc nipper
Joined: 23 Jun 2006
Posts: 21
Location: SYDNEY
|
| Posted: Thu Jul 27, 2006 10:01 pm Post subject: |
|
|
| what did you do with the front brake line...mine pulls tight at full lock |
|
| |
|
|
|
|
|
|
|
|
Ozzy84
Moderator
Joined: 10 Apr 2006
Posts: 894
Location: Gold Coast QLD
|
| Posted: Thu Jul 27, 2006 10:24 pm Post subject: |
|
|
mate has these, he has braided lines however.
get a set of these mate, worth the money |
|
| |
|
|
|
|
|
|
|
|
darkchild666
Big Bore, Stroked & Bling +
Joined: 21 Feb 2006
Posts: 347
Location: Burpengary qld
|
| Posted: Fri Jul 28, 2006 12:11 am Post subject: Re: pro-taper high atv bend |
|
|
| Cj5350 wrote: | Just tried to fit up some new pro taper High Atv Bend bars on my 06 YFZ only to realise that the 06 have a longer stem...now my cables are to short..
anyone running after market bars on a 06 YFZ??? |
hey,
I had the same problem on my ltr450 with that bend..
try to get the shop to swap them for cr med or cr low bend,I got the low bend,didnt have a problem after that...
lez
_________________
Sold -06 ltr450
one industries sticker kit
cherrybomb and mods |
|
| |
|
|
|
|
|
|
|
|
PeteW
Moderator
Joined: 09 Feb 2006
Posts: 1877
Location: Doreen, Vic
|
| Posted: Fri Jul 28, 2006 10:15 pm Post subject: |
|
|
| Cj5350 wrote: | | what did you do with the front brake line...mine pulls tight at full lock |
Braided lines.
Lez, the point of going for the high bend is um... the height. big difference down to a CR bend.
_________________
www.thumbpump.com
www.dirtcomp.com.au |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
