 |
 |
 |
 |
|
 |
 |
 |
 |
 |
mully 90cc 2 stroke / 110 4 stroke
Joined: 08 Nov 2006 Posts: 58 Location: Melbourne  |
Posted: Sat Oct 13, 2007 5:38 pm Post subject: NEW CUSTOM BUILT 2003 YAMAHA 660 RAPTOR. |
 |
|
NEW CUSTOM BUILT LIMITED EDITION 2003 YAMAHA 660 RAPTOR.
ZERO HOURS USE / NEVER RIDEN.
COST OVER $40,000 DOLLARS TO BUILD THIS TOY.
************************************************************
ELKA ELITE SHOCKS TRIPPLE RATE FRONT FULLY ADJUSTABLE.
ELKA ELITE SHOCK DULE RATE REAR FULLY ADJUSTABLE.
CHROME PLATED REAR LINKAGE.
ROLL DESIGN CHROME STEERING STEM ANTI VIBE.
ROLL DESIGN OVERSIZE BAR MOUNTING KIT.
ROLL DESIGN 2" WIDER GULL FRONT A-ARMS BLACK WITH CHROME.
CHROME PLATED HEAT SHEILDS.
YOSHIMURA FULL STAINLESS STEEL RACE SYSTEM HIGHLY POLISHED.
PRO TAPER BARS.
PRO-GRIP GRIPS.
MAGURA HYDRAULIC CLUTCH KIT WITH BRAIDE LINE.
SIDEWINDER TI-MOLY SPROKETS.
SIDWINDER + 4" CHAIN.
DR.D REVERSE LEVER.
MOTION PRO TWIST THROTTLE.
K&N FILTER.
K&N JET KIT.
K&N LID & OUTERWEARS.
BILLET PRO DESIGN PLATE.
DURABLUE CHROME REAR AXLE 2" WIDER.
RIS DESIGN POLISHED FOOT PEGS.
RIS POLISHED RATIATOR GRILL.
RIS POLSHED ENGINE PLUGS.
CHROME BILLET FRONT BRAKE LINE CLAMPS.
PRO-TUCKER BLUE ANODISED REAR BRAKE LINE CLAMPS.
GALFER BLUE BRAIDED REAR BRAKE LINE.
GALFER BLUE BRAIDED FRONT BRAKE LINE.
GALFER POLISHED REAR WAVE ROTOR.
GALFER BRAKE PADS.
PINGRY POLISHED OIL TANK.
RIS BILLET OIL DIPSTICK.
CUSTOM MADE BRAIDED OIL TANK LINES NIKO SHINE PLATED.
AMERICAN STAR TIE-RODS.
HIGH RPM CDI UNIT AND CHARGER.
RMW POLISHED BILLET CARBY COVER.
RMW BILLET REAR BRAKE BLOCK OFF.
RMW BILLET FUEL CAP WITH BREATHER.
RMW BILLET REAR MASTER CYLINDER.
RMW BILLET POLISHED CASE SAVER.
RMW BILLET REAR TAIL LIGHT SKULL.
PRO-TUCKER CHROME 4" REAR SWING ARM.
ALUMINUM CNC MACHINED BEARING CARRIER.
GYT-R FULL SKID PLATE.
GYT-R REAR SKID PLATE.
GYT-R FRONT GRAB BARS.
GYT-R REAR GRAB BAR.
GYT-R FRAME GUARDS.
GYT-R FOOT WELLS.
GYT-R OIL / WATER COVER.
GYT-R STARTER COVER.
GYT-R SHIFTER PEDAL.
GYT-R REAR BRAKE PEDAL.
GYT-R SPROCKET CARRIER.
GYT-R FRONT AND REAR HUBS.
DOUGLAS WHEELS HIGHLY POLISHED SHAMROCKS WITH BEAD LOCKS.
ITP HOLESHOT HD TYRES FRONT AND REAR.
REAR RADIATOR WATER OVERFLOW CARBON FIBER COVER.
REAR RADIATOR WATER OVERFLOW POLISHED BRACKET PROTECTOR.
BLUE SILICONE HOSES.
CARBON FIBER WARNING LABLE INSERTS.
CARBON FIBER TANK COVER.
STAINLESS STEEL POLISHED ALLEN KEY BOLTS THROUGH OUT.
+ MANY MORE EXTRAS AND ALL ORIGINALL TAKE OFF PARTS.
ANY QUESTIONS PLEASE EMAIL OR PHONE 0418125105.
CAN EMAIL PHOTOS.
OPEN TO OFFERS MUST SELL.
 |
|
| |
|
|
|
 |
 |
 |
 |
 |
Sponsor  |
|
|
|
 |
 |
 |
 |
 |
nikki_22979 50cc nipper
Joined: 14 Oct 2007 Posts: 3 Location: Butler, Perth WA  |
Posted: Sun Oct 14, 2007 12:22 am Post subject: Amazing!!! |
 |
|
Hi there.....what an awesum job ..what sort of price are you looking at? cheers Nikki _________________ "Live life like there's no 2moro" |
|
| |
|
|
|
 |
 |
 |
 |
 |
steve-omagnum 50cc nipper
Joined: 16 Oct 2007 Posts: 35
 |
Posted: Tue Oct 16, 2007 5:40 pm Post subject: |
 |
|
| hey i will give you $8000 cash |
|
| |
|
|
|
 |
 |
 |
 |
 |
mully 90cc 2 stroke / 110 4 stroke
Joined: 08 Nov 2006 Posts: 58 Location: Melbourne  |
Posted: Wed Oct 17, 2007 4:45 am Post subject: hey i will give you $8000 cash |
 |
|
steve-omagnum hey i will give you $8000 cash
I will take your $8000 as a holding deposit until you fine the other $20,000... |
|
| |
|
|
|
 |
 |
 |
 |
 |
Quad The Day Starts With OZATV !
Joined: 22 Oct 2006 Posts: 2773 Location: UP FRONT  |
Posted: Wed Oct 17, 2007 6:16 am Post subject: ok |
 |
|
| get real $10000 & its a bargin |
|
| |
|
|
|
 |
 |
 |
 |
 |
M.F.I. Blaster class

Joined: 01 Mar 2007 Posts: 124 Location: Gold Coast-Brisbane  |
Posted: Wed Oct 17, 2007 9:59 am Post subject: |
 |
|
Is the engine stock???
Looks great but is it faster than any other 660?? _________________ RAPTOR 660:
770cc Balanced & Blueprinted
BANSHEE
Trinity 410cc Kit:
I let people merge in front of me coz it makes me feel good?????? |
|
| |
|
|
|
 |
 |
 |
 |
 |
mully 90cc 2 stroke / 110 4 stroke
Joined: 08 Nov 2006 Posts: 58 Location: Melbourne  |
Posted: Wed Oct 17, 2007 7:23 pm Post subject: GET REAL |
 |
|
get real $10000 & its a bargin
Maybe a bargin for you,
The Quad NEW cost $12,600 with out the accessories. |
|
| |
|
|
|
 |
 |
 |
 |
 |
Quad The Day Starts With OZATV !
Joined: 22 Oct 2006 Posts: 2773 Location: UP FRONT  |
Posted: Wed Oct 17, 2007 7:31 pm Post subject: OK |
 |
|
| SO ITS NOW OLD AND A 660 |
|
| |
|
|
|
 |
 |
 |
 |
 |
mully 90cc 2 stroke / 110 4 stroke
Joined: 08 Nov 2006 Posts: 58 Location: Melbourne  |
Posted: Wed Oct 17, 2007 7:35 pm Post subject: Is the engine stock??? |
 |
|
Is the engine stock???
Looks great but is it faster than any other 660??
The Engine is stock with The 3 mods. Faster than any other 660 ? I think it would be with the 3 mods and Sidwinder sprokets / Gearing. The quad is new with zero hours use so i realy do not know. The new owner will find out.
Thanks Mully. |
|
| |
|
|
|
 |
 |
 |
 |
 |
mully 90cc 2 stroke / 110 4 stroke
Joined: 08 Nov 2006 Posts: 58 Location: Melbourne  |
Posted: Wed Oct 17, 2007 7:43 pm Post subject: Tell some one who cares |
 |
|
SO ITS NOW OLD AND A 660
Don't realy care I also have a NEW 700 as well........
 |
|
| |
|
|
|
 |
 |
 |
 |
 |
Banshee250R Moderator

Joined: 08 Jul 2006 Posts: 1101 Location: Newcastle. NSW  |
Posted: Wed Oct 17, 2007 7:43 pm Post subject: |
 |
|
Another case of "ALL SHOW AND NO GO" syndrome
and didn't you sell this about 8 times on ebay already? _________________ Doin skids for the kids and doughnuts for the grown-ups
------------------------------------------------ |
|
| |
|
|
|
 |
 |
 |
 |
 |
mully 90cc 2 stroke / 110 4 stroke
Joined: 08 Nov 2006 Posts: 58 Location: Melbourne  |
Posted: Wed Oct 17, 2007 7:59 pm Post subject: ALL SHOW AND NO GO |
 |
|
Another case of "ALL SHOW AND NO GO" syndrome
and didn't you sell this about 8 times on ebay already?
I listed it on Ebay 3 times & Never sold it.
Highest bid was $25,100, Reserve was not met.
" I WANT IT FOR NOTHING " syndrome. |
|
| |
|
|
|
 |
 |
 |
 |
 |
doorslammer Roostin Away
Joined: 24 Jul 2007 Posts: 902 Location: Northern WA  |
Posted: Wed Oct 17, 2007 8:01 pm Post subject: |
 |
|
yep id be glad to have it for nothing _________________ 01 Banshee
Never take life seriously. Nobody gets out alive anyway |
|
| |
|
|
|
 |
 |
 |
 |
 |
Banshee250R Moderator

Joined: 08 Jul 2006 Posts: 1101 Location: Newcastle. NSW  |
Posted: Wed Oct 17, 2007 8:04 pm Post subject: |
 |
|
well i thought 25g was a pretty fair price
as everyone knows as soon as the bike rolls out the dealership the price drops
even if it was stock you couldnt get 12,600 for it -people would go buy a new 700 _________________ Doin skids for the kids and doughnuts for the grown-ups
------------------------------------------------ |
|
| |
|
|
|
 |
 |
 |
 |
 |
rc 4fiddy Racer
Joined: 11 Jun 2007 Posts: 266 Location: west oz  |
Posted: Wed Oct 17, 2007 8:07 pm Post subject: |
 |
|
| sell it for parts and see how you go. |
|
| |
|
|
|
 |
 |
 |
 |
 |
Quad The Day Starts With OZATV !
Joined: 22 Oct 2006 Posts: 2773 Location: UP FRONT  |
Posted: Wed Oct 17, 2007 8:09 pm Post subject: OK |
 |
|
| TO MAKE IT RIGHT TURN THE FRONT WHEEL THE RIGHT WAY ROUND FOR THE FULL VALUE |
|
| |
|
|
|
 |
 |
 |
 |
 |
Banshee250R Moderator

Joined: 08 Jul 2006 Posts: 1101 Location: Newcastle. NSW  |
Posted: Wed Oct 17, 2007 8:13 pm Post subject: |
 |
|
pmsl
its a good thing he doesnt have paddles  _________________ Doin skids for the kids and doughnuts for the grown-ups
------------------------------------------------ |
|
| |
|
|
|
 |
 |
 |
 |
 |
mully 90cc 2 stroke / 110 4 stroke
Joined: 08 Nov 2006 Posts: 58 Location: Melbourne  |
Posted: Wed Oct 17, 2007 8:20 pm Post subject: Re: WHEEL THE RIGHT WAY ROUND |
 |
|
TO MAKE IT RIGHT TURN THE FRONT WHEEL THE RIGHT WAY ROUND FOR THE FULL VALUE
Thanks for your concern,
This is an old Photo before i fitted the carbon fiber Hipers on....... |
|
| |
|
|
|
 |
 |
 |
 |
 |
SIKMIC Moderator

Joined: 29 Jun 2006 Posts: 1112 Location: Moranbah Qld  |
Posted: Wed Oct 17, 2007 8:21 pm Post subject: |
 |
|
I doubt many people are going to be willing to pay what you are asking for it. Im not saying it isnt a nice bike, I love it. But it is a 660, and for the money you want they could put most of the gear that is on it on a 450 and have a way better bike with better resale value and all. Maybe if you drop your price you will get some offers.  _________________ Mic
YFZ450
Thanks to ATV's Unlimited &
Luke Beechey Motorsports
mic902@hotmail.com |
|
| |
|
|
|
 |
 |
 |
 |
 |
fossil800R The Day Starts With OZATV !

Joined: 22 Aug 2007 Posts: 1166 Location: Barkly, Victoria  |
Posted: Wed Oct 17, 2007 8:37 pm Post subject: |
 |
|
whyyyy has it got zero hours??
Purchased The Raptor new in 03 and never used it due to a work related injury, I built the bike for my own use, open to all serious offers, will not find one better,
This from one of your earlier posts regarding this bike. I am curious as to why a guy who cannot ride because of a work related injury has built two show condition bikes. It's just my two cents but these are sports atv's and are meant to be ridden not looked at. $800K for a phase3 GT Falcon I can see, they are rare in mint condition and have increased in value accordingly. However these are, despite how much bling is attached, Yamaha Raptors, and will depreciate in value rapidly the first time that shiny black rubber hits the dirt.
yamaha06blaster
"even if it was stock you couldnt get 12,600 for it -people would go buy a new 700"
I agree. My '07SE with 3 mod bolt ons plus shiny bits $16K. New bike warranty etc. Not quite as flash as those bikes but I am sure that after many years of riding her that I am going to be able to recoup a good portion of my initial outlay. As I said, just my two cents. Good luck with the sale and I hope you get what, or near to what, you are looking for them.
Just out of curiousity, is the 700 for sale also? _________________ I'm not suffering from insanity, I'm enjoying it!!! |
|
| |
|
|
|
 |
 |
 |
 |
 |
TasRaptor700 Big Bore, Stroked & Bling +

Joined: 05 Jul 2007 Posts: 499 Location: Tasmania  |
Posted: Thu Oct 18, 2007 3:52 pm Post subject: |
 |
|
Yeah, What the guy above said.....
Just out of curiosity, You have 2 great looking rides but it looks like you have never ridden either of them,,,,, can you ride a quad or do you just do them up.... _________________ Andrew |
|
| |
|
|
|
 |
 |
 |
 |
 |
yogie Moderator

Joined: 14 Feb 2006 Posts: 3620 Location: The Otways  |
Posted: Thu Oct 18, 2007 5:19 pm Post subject: |
 |
|
| yamaha06blaster wrote: | well i thought 25g was a pretty fair price
as everyone knows as soon as the bike rolls out the dealership the price drops
even if it was stock you couldnt get 12,600 for it -people would go buy a new 700 |
Spot on. How much would you sell it for stock anyway, put a price on it, we know you want 28k or there abouts, as is. how much of it would swap over to the 07 raptor.
I wouldnt take it where I go riding...  _________________ 2005 KFX700
With a few bells and whistles
and the twin yoshi's
American Star A-arms, tie rods
elka stickers
Shorty Shifter
I have a Waco
rossco gave me a flexx sticker
honda thumb
Great at climbing trees
durablue stickers |
|
| |
|
|
|
 |
 |
 |
 |
 |
bigjon Moderator

Joined: 17 Feb 2006 Posts: 1279 Location: Dubbo  |
Posted: Thu Oct 18, 2007 5:42 pm Post subject: |
 |
|
| yogie wrote: | I wouldnt take it where I go riding...  |
Trees? _________________ Don't close your eyes during the crash, you'll miss the best part |
|
| |
|
|
|
 |
 |
 |
 |
 |
yogie Moderator

Joined: 14 Feb 2006 Posts: 3620 Location: The Otways  |
Posted: Thu Oct 18, 2007 5:47 pm Post subject: |
 |
|
yes thank you john, you may go now.  _________________ 2005 KFX700
With a few bells and whistles
and the twin yoshi's
American Star A-arms, tie rods
elka stickers
Shorty Shifter
I have a Waco
rossco gave me a flexx sticker
honda thumb
Great at climbing trees
durablue stickers |
|
| |
|
|
|
 |
 |
 |
 |
 |
hammer686 4fiddy Racer
Joined: 12 Sep 2007 Posts: 202 Location: south coast wa  |
Posted: Thu Oct 18, 2007 10:18 pm Post subject: |
 |
|
"Highest bid was $25,100, Reserve was not met."
Zero hours or not anything better than 60% of your outlay & you should be happy.
Ask yourself who would want such a quad - not a racer or performance junkie.
Good luck getting 28k _________________ Raptor 700 |
|
| |
|
|
|
 |
 |
 |
 |
 |
|
 |
 |
 |
 |