 |
|
|
|
|
|
|
|
|
|
angus350
Blaster class
Joined: 11 Sep 2007
Posts: 125
Location: perth, wa
|
 Posted: Tue Oct 16, 2007 9:48 pm Post subject: removing a arms |
  |
|
hey im takin my a arms of my yfz450 and got eveythin undone but am stuck of the ball joint thingos that got onto the hub, were the top and bottom and the steering rod connects onto the hubs with them rubber things i cant get em off i squezzed one and greese came out eveywere. am i missing somthing or?????
thanks
benn
_________________
BENNO |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
greenhuman
Roostin Away
Joined: 12 Feb 2006
Posts: 980
|
| Posted: Tue Oct 16, 2007 11:35 pm Post subject: |
|
|
| I can loan you a ball joint seperator. PM me with your details. |
|
| |
|
|
|
|
|
|
|
|
PeteW
Moderator
Joined: 09 Feb 2006
Posts: 1877
Location: Doreen, Vic
|
| Posted: Wed Oct 17, 2007 12:44 am Post subject: Re: removing a arms |
|
|
| angus350 wrote: | hey im takin my a arms of my yfz450 and got eveythin undone but am stuck of the ball joint thingos that got onto the hub, were the top and bottom and the steering rod connects onto the hubs with them rubber things i cant get em off i squezzed one and greese came out eveywere. am i missing somthing or?????
thanks
benn |
go to super cheap and buy a ball joint separator for $20, failing that you could try hitting the side of the spindle where the thread goes through to help break the seal of the tapered section, DON'T hit the thread on the ball joints directly.
_________________
www.thumbpump.com
www.dirtcomp.com.au |
|
| |
|
|
|
|
|
|
|
|
angus350
Blaster class
Joined: 11 Sep 2007
Posts: 125
Location: perth, wa
|
| Posted: Wed Oct 17, 2007 6:31 pm Post subject: |
|
|
ahhh so i needd a proper tool then. ill go to super "profanity removed" and have a look
_________________
BENNO |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
