 |
|
|
|
|
|
|
|
|
|
1sick6
Big Bore, Stroked & Bling +
Joined: 20 Dec 2006
Posts: 340
Location: SA
|
 Posted: Wed Sep 05, 2007 4:55 pm Post subject: water lines on banshee?? and running engine in?? |
  |
|
hey every 1, i have just put my banshee engine back in the frame and ive got no idea where all the small water hoses run on the bike, theres 1 thats comes out of the water pump area and goes in to a "T" peice running off that T peice 1 of them goes to the back of the engine case and the other goes ?? duno maybe to the over flow bottle but which hole top of bottom.
and there is the hose comming out under the radiator ca, im guessing this 1 goes to the top hole in the over flow tank,
and then i got 1 long hose left i i got no idea where this 1 goes, lol any help would be great, thank you, Paul
Last edited by 1sick6 on Wed Sep 05, 2007 6:33 pm; edited 1 time in total |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
greenhuman
Roostin Away
Joined: 12 Feb 2006
Posts: 980
|
| Posted: Wed Sep 05, 2007 5:42 pm Post subject: |
|
|
| The hose from the T piece runs up to the front and hooks around a bracket on the right hand side of steering stem mount tube. The other long hose is the over flow line from the rez. It runs up front as well and hooks on the same bracket. The hoses point down toward the right chamber. |
|
| |
|
|
|
|
|
|
|
|
1sick6
Big Bore, Stroked & Bling +
Joined: 20 Dec 2006
Posts: 340
Location: SA
|
| Posted: Wed Sep 05, 2007 6:24 pm Post subject: |
|
|
| ok so is the top hole in the reserve tank and the out let from the t peice just breather hose and just vents to the atmosphere?/ thank you, Paul |
|
| |
|
|
|
|
|
|
|
|
fredom
90cc 2 stroke / 110 4 stroke
Joined: 25 Mar 2007
Posts: 66
Location: mildura
|
| Posted: Wed Sep 05, 2007 6:28 pm Post subject: |
|
|
i had the same trouble last week puttin my motor back in and yes there are two breathers that go to the front of the bike,not much help just thought id tell ya i had the same problem  |
|
| |
|
|
|
|
|
|
|
|
1sick6
Big Bore, Stroked & Bling +
Joined: 20 Dec 2006
Posts: 340
Location: SA
|
| Posted: Wed Sep 05, 2007 6:32 pm Post subject: |
|
|
thanx for the fast replys i should have it all going tonight.
Also what are every 1s thoughts on running a banshee engine in?
I put forged pistons in iand its .5 oversize if that makes any differance, thank you, Paul |
|
| |
|
|
|
|
|
|
|
|
doorslammer
Roostin Away
Joined: 24 Jul 2007
Posts: 902
Location: Northern WA
|
| Posted: Wed Sep 05, 2007 9:56 pm Post subject: |
|
|
dont use fully synthetic motor oil, use mineral based
_________________
01 Banshee
Never take life seriously. Nobody gets out alive anyway |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
