 |
|
|
|
|
|
|
|
|
|
TUFF AS
Big Bore, Stroked & Bling +
Joined: 09 Jan 2007
Posts: 497
Location: sydney
|
 Posted: Sun Jul 15, 2007 4:01 pm Post subject: what cool head domes to run on my banshee |
  |
|
hello need some help selecting a domes for a pro desigm cool head kit
i am running the following
tommey t6 pipes
aftermarket air box no lid
k&n air filter kit
pro design high flow billet manifold with boost bottle
v force 3 reeds and spacer
any ideas will help thanks |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
ashnery
Moderator
Joined: 03 Jul 2006
Posts: 927
Location: www.dn.eng.com.au
|
| Posted: Sun Jul 15, 2007 5:06 pm Post subject: |
|
|
With the combination you are running i would advance the timming 3-4 deg
and run 21cc domes.
prem 98 octane bp fuel
valvoline outboard 2 stroke oil(cheap and very high quality)
600 to 650ml per 20litre 32:1 or 35:1
22cc domes will also work well and not stress the motor to much
going any lower than 21cc and you can start to get into trouble.
I have been as low as 15cc domes on alky but if you ride any longer than 10 seconds YOU WILL BE REPLACING YOUR ORINGS.
You clearly want to go faster to beat the beloved four strokes by more than 5 bike lengths you need timming .
Simpliy remove your flywheel
mark your timming plate (this is 0 deg timming)
remove the 3 bolts that hold on your timming plate
with a round file elongate the holes clockwise 6mm
reinstall timming plate rotate 3-4mm towards the gear lever(clockwise) nip up the bolts and reinstal flywheel.
every 1mm from your o deg mark is roughly 1 deg
dont forget you can reset your clearences between the flywheel and the timming pick up.
but the simple way is a timming plate with deg or a jmc 3 deg flywheel key.
_________________
OH "profanity removed" I SAID "profanity removed".......OH "profanity removed" I SAID "profanity removed" |
|
| |
|
|
|
|
|
|
|
|
TUFF AS
Big Bore, Stroked & Bling +
Joined: 09 Jan 2007
Posts: 497
Location: sydney
|
| Posted: Sun Jul 15, 2007 6:22 pm Post subject: |
|
|
| i have a aftermarket rev limiter on its way what they recan advances the timing by 5 degrees and 1000rpm more |
|
| |
|
|
|
|
|
|
|
|
Todd 127
The Day Starts With OZATV !
Joined: 12 Feb 2006
Posts: 1267
Location: Hawkesbury
|
| Posted: Sun Jul 15, 2007 6:28 pm Post subject: |
|
|
| If you need any domes, i brought some back from the states with me, there at Hardimans shop, just give Shane a call and he can sort you out with a few different sizes !! |
|
| |
|
|
|
|
|
|
|
|
ashnery
Moderator
Joined: 03 Jul 2006
Posts: 927
Location: www.dn.eng.com.au
|
| Posted: Mon Jul 16, 2007 9:20 am Post subject: |
|
|
Dont forget to richen up your main jets when you advance your timming...
or you will melt a piston...
_________________
OH "profanity removed" I SAID "profanity removed".......OH "profanity removed" I SAID "profanity removed" |
|
| |
|
|
|
|
|
|
|
|
Quad
The Day Starts With OZATV !
Joined: 22 Oct 2006
Posts: 2773
Location: UP FRONT
|
| Posted: Mon Jul 16, 2007 1:36 pm Post subject: zz |
|
|
out board oil who said that good thing works some nut  |
|
| |
|
|
|
|
|
|
|
|
TUFF AS
Big Bore, Stroked & Bling +
Joined: 09 Jan 2007
Posts: 497
Location: sydney
|
| Posted: Mon Jul 16, 2007 5:08 pm Post subject: |
|
|
| after i put all the stuff on i am getting it dyno tuned |
|
| |
|
|
|
|
|
|
|
|
ashnery
Moderator
Joined: 03 Jul 2006
Posts: 927
Location: www.dn.eng.com.au
|
| Posted: Wed Jul 18, 2007 7:33 pm Post subject: |
|
|
explosive racing is the place to go for dyno tuning
they have the top 5 fastest bikes in oz that i no of...
_________________
OH "profanity removed" I SAID "profanity removed".......OH "profanity removed" I SAID "profanity removed" |
|
| |
|
|
|
|
|
|
|
|
TUFF AS
Big Bore, Stroked & Bling +
Joined: 09 Jan 2007
Posts: 497
Location: sydney
|
| Posted: Thu Jul 19, 2007 3:51 pm Post subject: |
|
|
| yeah i know i got my 660 dynoed there |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
