 |
 |
 |
 |
|
 |
 |
 |
 |
 |
Chewin 50cc nipper

Joined: 24 Aug 2006 Posts: 33 Location: SA  |
Posted: Sun Apr 29, 2007 12:46 pm Post subject: YFZ450 Stator signal wire? |
 |
|
G'day im about to fit a pro design kill switch to my Yam. What colour is the stator signal wire?
Any assistance would be great
Ben _________________ 06 YFZ450
Weekend Rider .... Midweek Repairer |
|
| |
|
|
|
 |
 |
 |
 |
 |
Sponsor  |
|
|
|
 |
 |
 |
 |
 |
Ozzy84 Moderator

Joined: 10 Apr 2006 Posts: 894 Location: Gold Coast QLD  |
Posted: Sun Apr 29, 2007 8:13 pm Post subject: |
 |
|
about 90% sure its brown, get ya multi meter out and check i guess.
but yeah pretty sure its brown |
|
| |
|
|
|
 |
 |
 |
 |
 |
Chewin 50cc nipper

Joined: 24 Aug 2006 Posts: 33 Location: SA  |
Posted: Sun Apr 29, 2007 8:27 pm Post subject: |
 |
|
no worries cheers _________________ 06 YFZ450
Weekend Rider .... Midweek Repairer |
|
| |
|
|
|
 |
 |
 |
 |
 |
PeteW Moderator

Joined: 09 Feb 2006 Posts: 1877 Location: Doreen, Vic  |
Posted: Wed May 02, 2007 11:47 am Post subject: |
 |
|
| 700rappy wrote: | about 90% sure its brown, get ya multi meter out and check i guess.
but yeah pretty sure its brown |
ahh. nope.
It's white.
under the hood there is a connector with a red wire and a white wire going into it from the stator. hook into the white wire and the other to ground or hook to both and you won't have to worry about re-wiring if you get an after market ignition. _________________
www.thumbpump.com
www.dirtcomp.com.au |
|
| |
|
|
|
 |
 |
 |
 |
 |
HUGE Roostin Away

Joined: 10 Sep 2006 Posts: 625
 |
Posted: Wed May 02, 2007 12:20 pm Post subject: |
 |
|
pete -- is this the same on a 700 raptor? _________________ -------------------------------------------------------
THE BIGGER YOU ARE THE HARDER YOU FALL |
|
| |
|
|
|
 |
 |
 |
 |
 |
Ozzy84 Moderator

Joined: 10 Apr 2006 Posts: 894 Location: Gold Coast QLD  |
Posted: Wed May 02, 2007 4:34 pm Post subject: |
 |
|
ooops, my bad.
guess mine was dirty  |
|
| |
|
|
|
 |
 |
 |
 |
 |
Chewin 50cc nipper

Joined: 24 Aug 2006 Posts: 33 Location: SA  |
Posted: Wed May 02, 2007 5:30 pm Post subject: |
 |
|
Righto cheers. Ive been putting it off because it doesnt look like the easiest place to get to with a soldering iron. Im doing it tonight so i'll take your word on the colours.
Cheers
Ben _________________ 06 YFZ450
Weekend Rider .... Midweek Repairer |
|
| |
|
|
|
 |
 |
 |
 |
 |
|
 |
 |
 |
 |