 |
|
|
|
|
|
|
|
|
|
baalsgate
50cc nipper
Joined: 07 Jan 2012
Posts: 14
Location: Melbourne
|
 Posted: Tue Jan 10, 2012 5:02 pm Post subject: HOW to remove the Flywheel on a Yamaha Big Bear 350 ? |
  |
|
I am having a bit of trouble removing the fly wheel , do i need to remove the hex screws inside the flywheel or are they like in Kawasaki just hold a starter clutch and can stay in when removing the flywheel .
Any one got a puller they can lend me to crack this flywheel off ?
its 35mm x 1.5 thread and I am having a massively hard time tring to remove it with a 3 prong gear puller.
cheers |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
PeteW
Moderator
Joined: 09 Feb 2006
Posts: 1877
Location: Doreen, Vic
|
| Posted: Mon Jan 30, 2012 10:29 am Post subject: |
|
|
you probably wont get it off with a three jaw puller, motion pro will have a proper 35x1.5mm puller relatively cheap
_________________
www.thumbpump.com
www.dirtcomp.com.au |
|
| |
|
|
|
|
|
|
|
|
baalsgate
50cc nipper
Joined: 07 Jan 2012
Posts: 14
Location: Melbourne
|
| Posted: Tue Jan 31, 2012 4:16 pm Post subject: |
|
|
| I bought one of the very expensive pullers from bursons, so I am now renting it if anyone is interested , as i have done the job I needed to do. |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
