 |
|
|
|
|
|
|
|
|
|
HUGE
Roostin Away
Joined: 10 Sep 2006
Posts: 625
|
 Posted: Thu Apr 12, 2007 2:49 pm Post subject: "HELP" swingarm |
  |
|
i am trying to remove the swingarm on a yamaha warrior
i have given the bolt a hit with the hammer and a block of wood and it didnt move
b4 i go and bush the "profanity removed" out of it ---- is there some way this bolt must be removed?
or do i just hit it with a drift and a hammer?
please help
_________________
-------------------------------------------------------
THE BIGGER YOU ARE THE HARDER YOU FALL |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
Postie
Roostin Away
Joined: 20 Feb 2006
Posts: 855
Location: Mitchell QLD
|
| Posted: Thu Apr 12, 2007 5:57 pm Post subject: |
|
|
| It sounds like you need a bigger hammer it should come out, they do get pretty tight and make sure to leave the nut flush with the end of the bolt and remove after it loosens to protect the thread. |
|
| |
|
|
|
|
|
|
|
|
ashnery
Moderator
Joined: 03 Jul 2006
Posts: 927
Location: www.dn.eng.com.au
|
| Posted: Thu Apr 12, 2007 6:59 pm Post subject: |
|
|
you are in trouble
your roller bearings have rusted themselves to the sleeve in turn has rusted to the bolt
try soaking it for a day or so in crc
belt it with a sledge hammer
then try heating with an oxy
if all fails you have to hacksaw the bolt in two places so you can remove the swingarm..
I have done many and it will take you a while.
_________________
OH "profanity removed" I SAID "profanity removed".......OH "profanity removed" I SAID "profanity removed" |
|
| |
|
|
|
|
|
|
|
|
HUGE
Roostin Away
Joined: 10 Sep 2006
Posts: 625
|
| Posted: Thu Apr 12, 2007 7:03 pm Post subject: |
|
|
jobs done thanks guys
_________________
-------------------------------------------------------
THE BIGGER YOU ARE THE HARDER YOU FALL |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
