 |
 |
 |
 |
|
 |
 |
 |
 |
 |
mex087 50cc nipper
Joined: 12 Jan 2008 Posts: 48 Location: seaham  |
Posted: Sun Jul 24, 2011 9:19 pm Post subject: Trx250r 87 steering stem. |
 |
|
Chasing an extended steering stem for a 250r , mayb 2 inches. And does anyone have any other parts of interest around newcastle area.
Cheers Aaron |
|
| |
|
|
|
 |
 |
 |
 |
 |
Sponsor  |
|
|
|
 |
 |
 |
 |
 |
JimmyO 4fiddy Racer
Joined: 03 Sep 2010 Posts: 217 Location: Perth  |
Posted: Sun Jul 24, 2011 9:23 pm Post subject: |
 |
|
| if you've got a stem already take it down to your local engineering shop and get them to make one with the 2" extra. probably be easier and then when you bend it next time you can go back and get another quite easily |
|
| |
|
|
|
 |
 |
 |
 |
 |
tbr926 4fiddy Racer

Joined: 08 Feb 2009 Posts: 246 Location: perth  |
Posted: Tue Jul 26, 2011 10:09 pm Post subject: |
 |
|
| quad parts does that and mike who owns the joint rode with 1 that broke save your self the dnf and by a after market 1 |
|
| |
|
|
|
 |
 |
 |
 |
 |
JimmyO 4fiddy Racer
Joined: 03 Sep 2010 Posts: 217 Location: Perth  |
Posted: Tue Jul 26, 2011 11:33 pm Post subject: |
 |
|
ive had them in bikes before and as long as the people who make em do it right can be a much better option than trying to find aftermarkets for a "hard to find parts for" bike
and whos to say mike's wouldnt have broken with an aftermarket stem |
|
| |
|
|
|
 |
 |
 |
 |
 |
tbr926 4fiddy Racer

Joined: 08 Feb 2009 Posts: 246 Location: perth  |
Posted: Wed Jul 27, 2011 10:50 pm Post subject: |
 |
|
A they are race tested and
B the AUD dollar cracked a $1.10 today against the US |
|
| |
|
|
|
 |
 |
 |
 |
 |
|
 |
 |
 |
 |