 |
|
|
|
|
|
|
|
|
|
jordan1
90cc 2 stroke / 110 4 stroke
Joined: 02 Sep 2010
Posts: 82
Location: newcastle
|
 Posted: Mon May 16, 2011 8:38 am Post subject: Ltr 450 electrical start issue |
  |
|
Come across this yesterday
Went to start my Suzuki ltr450 turned key to on position and got no lights so I thought I had a flat battery . So I moved my quad to get to the battery and heard the egnition turn on and all the lights we were so I started it. it than ran for 2 min then switched of n no lights again when I went to start it but found when I wriggle the clutch handle I get lights start it and still runs for like 2 min
Has anyone come across this
Cheers |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
truant
90cc 2 stroke / 110 4 stroke
Joined: 13 Aug 2007
Posts: 68
Location: Wanneroo ... now Port Hedland
|
| Posted: Mon May 16, 2011 10:00 am Post subject: |
|
|
i had a similar issue a while back turned out the nuetral start switch (mounted on the clutch lever) had been pinched a little after ajusting the handlebar and clutch lever position. needed to adjust the clutch lever up ward so the switch wasnt pressed up against the bars.
may not be your issue but worth looking at.
_________________
08 Raptor 250 (missus)
10 ltr450 |
|
| |
|
|
|
|
|
|
|
|
jordan1
90cc 2 stroke / 110 4 stroke
Joined: 02 Sep 2010
Posts: 82
Location: newcastle
|
| Posted: Mon May 16, 2011 10:24 am Post subject: |
|
|
| Worth a look when I get home cause I no the clutch lever is pretty loose and when their is no ignition lights n I wriggle the lever the light pop on and it starts but strange it only runs for like 2-3 min then turns off |
|
| |
|
|
|
|
|
|
|
|
just doin it
Big Bore, Stroked & Bling +
Joined: 06 Jul 2008
Posts: 425
Location: kingaroy qld
|
| Posted: Mon May 16, 2011 11:51 am Post subject: |
|
|
Had a similar problem, but mine was in the original kill switch, the red slide, was in where the wires went onto the contacts.
_________________
JUST DOIN IT |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
