OZ ATV :: The Australian ATV Forum

[Straker]

Hi guys,

I have a few spares for the ATC 200E (Big Red) including a complete engine and carby, good front fender, handlebar risers, V-Plate (top of forks), petrol tank with rubbers, rear tool box, air filter box, front wheel axle rod, wiring, some rubbers and other small bits.

Best
James

[dc300r]

what sort of money are you looking for on the front wheel
_________________
go the 300r

[Straker]

No wheels unfortunately, only a front fender which is in good condition.

Best
James

[jkreijkamp]

How much would you ask for the air box with shipping to 4210? Does it include the lid, screws and filter? Just bought an old 200e today and let's say it needs some work so if anybody else in gold coast area has tips, spares whatever just let me know!
(even though my 200e is close to a pile of rust the engine still starts without effort so that gives me hope I can get it usable enough to help us out on our little acreage wich is far from flat terrain.

[Straker]

Hi there,

I wasn't able to get the main air box out, the bolts were all rusted in, as most of the frame had disintigrated into rust, and while having the appearance of an actual bike, once everything was removed that was holding it together, it just fell apart. air filter crumbled in my hands, but I kept the inner brass sleeve.

I have the airbox lid and screws and several other parts here including the three round large rubber that I think go under the seat?

There's a petrol tank, a front axle bolt, a complete engine that is supposed to run, a nice front fender, a tow bar assembly (rusty, but will clean up fine), the front part of the exhaust, numerout bolts and bits.

If you have an email address, or if I can work out how to post photos, I can show you the parts.

Best
James

[jkreijkamp]

Hi James,

I already posted a PM with my e-mail (don't like to publish my email on public forum), but basically, I'm interested in the lid, depending on costs and such (found an affordable box on ebay without lid and I still have the air filter).

Other stuff I'm interested in is anything back-brake related, handle bar, handle bar mount, cable, foot brake (although I'm happy if it works with handle bar, bike isn't gonna be a show-bike , drum.

If the carby is good and the price cheap, I'd be interested in that as well, as mine at least need a good clean and I'm lazy

You don't happen to live in Gold Coast or Brisbane area, do you?

Cheers,
Jaap
_________________
Owner of an old atc200e