 |
|
|
|
|
|
|
|
|
|
Straker
50cc nipper
Joined: 03 Feb 2011
Posts: 27
|
 Posted: Mon Feb 07, 2011 7:02 pm Post subject: ATC Wiring and Switch re-build |
  |
|
Hi there,
Would anyone have a photo (or could possible take one) of the wiring assembly set-up that sits under the seat on the 125m, usually covered by a plastic box.
It's the one thing I forgot to photograph in the disassembly of mine before re-building it. I'm up to the wiring loom, and need a shot of that section.
Also if anyone is interested I just restored the starter/lights switch assembly, and took photos of all the tiny pieces inside. Mine was rusted out and seized, but works beautifully now, no cost involved except time and patience.
Same switch as on the 200E and probably other ATC models too.
Best
James |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
greenhuman
Roostin Away
Joined: 12 Feb 2006
Posts: 980
|
| Posted: Tue Feb 08, 2011 12:30 am Post subject: |
|
|
| I'll post up this image tomorrow. |
|
| |
|
|
|
|
|
|
|
|
Straker
50cc nipper
Joined: 03 Feb 2011
Posts: 27
|
| Posted: Tue Feb 08, 2011 11:44 am Post subject: Thankyou! |
|
|
Thankyou, much appreciated!
Best
James |
|
| |
|
|
|
|
|
|
|
|
greenhuman
Roostin Away
Joined: 12 Feb 2006
Posts: 980
|
| Posted: Tue Feb 08, 2011 7:56 pm Post subject: harness |
|
|
[img] [/img] |
|
| |
|
|
|
|
|
|
|
|
Straker
50cc nipper
Joined: 03 Feb 2011
Posts: 27
|
| Posted: Wed Feb 09, 2011 12:41 pm Post subject: Thanks heaps. |
|
|
Thankyou..this helps a lot. Had mine around the wrong way.
Best
James |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
