 |
|
|
|
|
|
|
|
|
|
Rip It Up
50cc nipper
Joined: 07 Jun 2009
Posts: 18
|
 Posted: Sun Jun 07, 2009 9:29 pm Post subject: Bloody thing wont start |
  |
|
I got my son a Fuxin 70 for his first bike and it has been great. BUT today he tried crossing a creek and got bogged so I pushed him threw with my bike. He got threw the mud and rode around for about 10 minutes with no dramas, when he turned it off it wouldnt start again  So I towed him back across the creek. I checked the oil and it was full of water. No water in the carby or air filter. No spark at the plug so took the cover of the stator because the stator cover thingy had been cracked and it was full of water. I know stuff all about mechanics so any advise would be greatly appreciated on what I should do next. Coil,CDI Stator??? is there a common fault in this situation.
Thank you |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
Rip It Up
50cc nipper
Joined: 07 Jun 2009
Posts: 18
|
| Posted: Fri Jun 12, 2009 7:21 pm Post subject: |
|
|
| Yer, Thanks for all the Help fellas. I got it going but yous probly dont give a f#ck. |
|
| |
|
|
|
|
|
|
|
|
Clarkie
The Day Starts With OZATV !
Joined: 26 Jan 2009
Posts: 1138
Location: Mildura VIC
|
| Posted: Fri Jun 12, 2009 7:29 pm Post subject: |
|
|
What was the problem?
_________________
Has turned to the Dark Side! |
|
| |
|
|
|
|
|
|
|
|
doorslammer
Roostin Away
Joined: 24 Jul 2007
Posts: 902
Location: Northern WA
|
| Posted: Fri Jun 12, 2009 7:55 pm Post subject: |
|
|
| Rip It Up wrote: | | Yer, Thanks for all the Help fellas. I got it going but yous probly dont give a f#ck. |
ahahha
sorry we didnt all jump to your needs, i didnt even see this post untill just then when clarkie bumped it. and with that attitude your right i dont give a F%$K
_________________
01 Banshee
Never take life seriously. Nobody gets out alive anyway |
|
| |
|
|
|
|
|
|
|
|
Clarkie
The Day Starts With OZATV !
Joined: 26 Jan 2009
Posts: 1138
Location: Mildura VIC
|
| Posted: Fri Jun 12, 2009 7:58 pm Post subject: |
|
|
HE HE HE Doorslammer, good reply
_________________
Has turned to the Dark Side! |
|
| |
|
|
|
|
|
|
|
|
Rip It Up
50cc nipper
Joined: 07 Jun 2009
Posts: 18
|
| Posted: Fri Jun 12, 2009 10:12 pm Post subject: |
|
|
Sorry blokes I couldnt help mysefl:+:  I new I would get a bite
Clarkie - Im no mechanic so I dont know what you call all the parts so I find it hard to explain. But here gos, when I turned the key the starter motor worked but was not locking onto the shaft that comes outta the motor to turn the motor over, so I removed the big magnetic cylinder thing that the stator sits in and found that on the back of the big cyliner thing was 3 bearings that are ment to lock onto the shaft but they were full of dirt therefor did not move to lock onto the shaft which must spin to let the stator work to make the spark?????? anyway I cleaned the 3 bearings threw it back together and it worked  Also I found that the housing around the stator had a big hole in it which musta let the water and dirt in. Sorry if all that dribble didnt make sense but thats how I seen it.
Cheers Rip It Up |
|
| |
|
|
|
|
|
|
|
|
stink989
Blaster class
Joined: 21 Apr 2008
Posts: 130
Location: Wellington, NSW
|
| Posted: Fri Jun 12, 2009 11:15 pm Post subject: |
|
|
i think he is talking about the starter clutch?
_________________
2006 Banshee
Ridden not pampered |
|
| |
|
|
|
|
|
|
|
|
Clarkie
The Day Starts With OZATV !
Joined: 26 Jan 2009
Posts: 1138
Location: Mildura VIC
|
| Posted: Sat Jun 13, 2009 9:49 am Post subject: |
|
|
Made sense to me, thats how all my customers explain electrical things
_________________
Has turned to the Dark Side! |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
