 |
|
|
|
|
|
|
|
|
|
Ltr450 wj
50cc nipper
Joined: 15 Jun 2008
Posts: 27
Location: nsw
|
 Posted: Sun Apr 26, 2009 7:12 pm Post subject: raptor 700 gear problem |
  |
|
| hi ive got a 08 raptor 700 and last week i shifted it into 5th gear and it started to jerk me back and foward and now thats all it does it onlydoes this in 5th |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
Shawn
Blaster class
Joined: 16 Aug 2008
Posts: 175
Location: Central Coast
|
| Posted: Tue Apr 28, 2009 10:56 am Post subject: |
|
|
Are you hitting the rev or speed limited? My 09 Raptor done this in fifth gear as well, disconnected the speed limited & it doesn't do I any more.
_________________
Raptor 700R 09' |
|
| |
|
|
|
|
|
|
|
|
Swanga
90cc 2 stroke / 110 4 stroke
Joined: 06 Oct 2006
Posts: 72
|
| Posted: Tue Apr 28, 2009 3:39 pm Post subject: |
|
|
| Shawn wrote: | | Are you hitting the rev or speed limited? My 09 Raptor done this in fifth gear as well, disconnected the speed limited & it doesn't do I any more. |
Does the engine light come on if you disconnect the speed limiter? |
|
| |
|
|
|
|
|
|
|
|
bowser
4fiddy Racer
Joined: 28 Oct 2008
Posts: 208
Location: newcastle
|
| Posted: Tue Apr 28, 2009 5:55 pm Post subject: |
|
|
cut and ground the light blue wire on the end of the ecu loom and you don't need to disconnect the sensor and won't get check eng light on
_________________
08 Raptor 700SE
Cheap, Fast, Reliable....Pick any 2 |
|
| |
|
|
|
|
|
|
|
|
Swanga
90cc 2 stroke / 110 4 stroke
Joined: 06 Oct 2006
Posts: 72
|
| Posted: Tue Apr 28, 2009 6:16 pm Post subject: |
|
|
| bowser wrote: | | cut and ground the light blue wire on the end of the ecu loom and you don't need to disconnect the sensor and won't get check eng light on |
I read on the raptorforums that it doesnt work on the 09?? |
|
| |
|
|
|
|
|
|
|
|
bowser
4fiddy Racer
Joined: 28 Oct 2008
Posts: 208
Location: newcastle
|
| Posted: Tue Apr 28, 2009 6:20 pm Post subject: |
|
|
| Swanga wrote: | | bowser wrote: | | cut and ground the light blue wire on the end of the ecu loom and you don't need to disconnect the sensor and won't get check eng light on |
I read on the raptorforums that it doesnt work on the 09?? |
i got 08, have a look at the differences between the 08 and 09 wiring diagrams, can't see yamaha doing much different besides adding the speedo
_________________
08 Raptor 700SE
Cheap, Fast, Reliable....Pick any 2 |
|
| |
|
|
|
|
|
|
|
|
Shawn
Blaster class
Joined: 16 Aug 2008
Posts: 175
Location: Central Coast
|
| Posted: Tue Apr 28, 2009 7:02 pm Post subject: |
|
|
I have not been able to verify if cutting the blue wire works on the 09' Raptor. My Raptor done exactly as above in fifth gear. Disconnected the speedo seemed to stop this & that is all it seemed to do. No speed gain at all, just no shaking.
_________________
Raptor 700R 09' |
|
| |
|
|
|
|
|
|
|
|
Ltr450 wj
50cc nipper
Joined: 15 Jun 2008
Posts: 27
Location: nsw
|
| Posted: Tue Apr 28, 2009 7:12 pm Post subject: |
|
|
| no its starts doing it when i get in 5th with a bit of throtle no i haven disconect the speed sensor were is it on the motor |
|
| |
|
|
|
|
|
|
|
|
Swanga
90cc 2 stroke / 110 4 stroke
Joined: 06 Oct 2006
Posts: 72
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
