 |
|
|
|
|
|
|
|
|
|
goerb
50cc nipper
Joined: 15 Mar 2009
Posts: 1
Location: Newman
|
 Posted: Sun Mar 15, 2009 9:04 pm Post subject: Bent 660Raptor frame |
  |
|
G'day everyone
Any suggestions on where i could find a main frame for a 05 660 raptor?
A mate of mine rolled it and its bent the frame where the steering stem support bolts to it.
Cheers |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
471
50cc nipper
Joined: 29 May 2008
Posts: 22
Location: qld
|
| Posted: Sun Mar 22, 2009 8:01 pm Post subject: |
|
|
They always bend there if you havnt got a good steering stem, A block of timber and a sledge hammer will get you out of trouble , mines been done 3 times.
_________________
Raptors RULE ! |
|
| |
|
|
|
|
|
|
|
|
PeteW
Moderator
Joined: 09 Feb 2006
Posts: 1877
Location: Doreen, Vic
|
| Posted: Sun Mar 22, 2009 8:17 pm Post subject: |
|
|
yeah, bend it back and gusset it if you can, not worth buyinf a whole new frame for.
_________________
www.thumbpump.com
www.dirtcomp.com.au |
|
| |
|
|
|
|
|
|
|
|
Dingo555
Roostin Away
Joined: 25 Sep 2007
Posts: 778
Location: Closer to the Qld coast
|
| Posted: Thu Apr 02, 2009 10:03 pm Post subject: |
|
|
you'd be surprised what you can straighten with some lateral thinking....
Here is a 10 min old banshee that required some major work, shee's still getting around in Moranbah here good as gold 
_________________
10 LTR 555 Dingo
06 LTR 94 Kay
Thanks for all the support and good advice
ATVPRO
Colac Motorcylces
Luke Beechey Motorsports
Proud supporter of Team Ironpot
No skills or good habits, just point it and stab it..!! |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
