 |
|
|
|
|
|
|
|
|
|
ReD HeaderZ
Roostin Away
Joined: 24 Jul 2006
Posts: 828
|
 Posted: Mon Feb 23, 2009 8:45 pm Post subject: What can be done to a blaster to get some power (cheaply) |
  |
|
| Any help would be great, I don't know much about two strokes. Thanks in advance, if anyone has any go fast parts please let me know as well. Cheers |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
wa5
Big Bore, Stroked & Bling +
Joined: 06 Nov 2007
Posts: 446
Location: Port Stephens
|
| Posted: Mon Feb 23, 2009 8:50 pm Post subject: |
|
|
| Cheap, Fast, Reliable...... Choose any two. |
|
| |
|
|
|
|
|
|
|
|
ReD HeaderZ
Roostin Away
Joined: 24 Jul 2006
Posts: 828
|
| Posted: Mon Feb 23, 2009 8:53 pm Post subject: |
|
|
cheap, reliable would be nice 
My 660 is unreliable enough |
|
| |
|
|
|
|
|
|
|
|
t&l performance
The Day Starts With OZATV !
Joined: 07 Sep 2008
Posts: 1131
Location: perth
|
| Posted: Mon Feb 23, 2009 8:54 pm Post subject: |
|
|
| push it down a mine shaft only joking pipe and filter and jet it and add some good reeds |
|
| |
|
|
|
|
|
|
|
|
PeteW
Moderator
Joined: 09 Feb 2006
Posts: 1877
Location: Doreen, Vic
|
| Posted: Tue Feb 24, 2009 12:00 am Post subject: |
|
|
Like 700quad said pipe, filter, reeds and jet it right and it'll be fast enough for a blaster. If you haven't already get rid of the oil injection system, block off the oil inlet to the carb and run pre-mix, thal'll make it more reliable and give you some control over the mix ratio
_________________
www.thumbpump.com
www.dirtcomp.com.au |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
