 |
|
|
|
|
|
|
|
|
|
Dazz
Roostin Away
Joined: 12 Dec 2008
Posts: 586
|
 Posted: Sat Mar 14, 2009 4:52 pm Post subject: Vapor settings? |
  |
|
im trying to set up my vapor computer
the temp reports 222c as the maximum temprature the quad reached while riding
it also reports 10250rpm
does this sound typical for a raptor 350 ? |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
doorslammer
Roostin Away
Joined: 24 Jul 2007
Posts: 902
Location: Northern WA
|
| Posted: Sat Mar 14, 2009 6:40 pm Post subject: |
|
|
you need to change the PPR for your tach.
hold all three buttons for 3 seconds untill the screen changes, then press "MODE" about 4 times to get to the screen that says "PPr".
yours should currently be set on .5, change it to 1 by pressing the up and down buttons, then press "MODE" at the next screen make sure that "pulse" is set to 0000.
are you sure your temp is in degrees C, if its not after the "pulse" screen is up and you've pressed "MODE" (again) you will get to a screen where you can change the unit of measure.
if your tacho is still out you may need to change the "PPr" to 2 but i doubt it.
_________________
01 Banshee
Never take life seriously. Nobody gets out alive anyway |
|
| |
|
|
|
|
|
|
|
|
Dazz
Roostin Away
Joined: 12 Dec 2008
Posts: 586
|
| Posted: Sat Mar 14, 2009 8:00 pm Post subject: |
|
|
| the rev's was the max over the day is it too high ? |
|
| |
|
|
|
|
|
|
|
|
doorslammer
Roostin Away
Joined: 24 Jul 2007
Posts: 902
Location: Northern WA
|
| Posted: Sat Mar 14, 2009 8:19 pm Post subject: |
|
|
yes
_________________
01 Banshee
Never take life seriously. Nobody gets out alive anyway |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
