 |
|
|
|
|
|
|
|
|
|
union
90cc 2 stroke / 110 4 stroke
Joined: 02 Nov 2008
Posts: 86
|
 Posted: Thu Dec 04, 2008 5:11 pm Post subject: changing stock banshee air filter |
  |
|
I was told that the stock air filters a crap for riding on sand and that it could lead to engine failure. Is this true.
Will i need to rejet?
And lastly, anyone know a good online shop for parts?
Thanks. |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
bigjon
Moderator
Joined: 17 Feb 2006
Posts: 1279
Location: Dubbo
|
| Posted: Thu Dec 04, 2008 5:37 pm Post subject: |
|
|
Most stock filters are crap because they have a poor fitment. Poor fitment can lead to sand getting thru and thus lead to engine failure.
I have a Motoworks non-oil air filter but most guys would probably recommend a Pro-Design, K&N or something equivalent.
Yes, you would more than likely need to re-jet if you install an aftermarket air filter.
I'm not a 2 stroke expert so can't tell you jetting numbers.
_________________
Don't close your eyes during the crash, you'll miss the best part |
|
| |
|
|
|
|
|
|
|
|
PSI-346
90cc 2 stroke / 110 4 stroke
Joined: 30 Aug 2008
Posts: 58
Location: Rocko, Perth
|
| Posted: Thu Dec 04, 2008 6:45 pm Post subject: |
|
|
| dont have to rejet if you leave the airbox lid on, thats what i was told anyway. |
|
| |
|
|
|
|
|
|
|
|
PeteW
Moderator
Joined: 09 Feb 2006
Posts: 1877
Location: Doreen, Vic
|
| Posted: Thu Dec 04, 2008 10:11 pm Post subject: |
|
|
Any aftermarket filter will be better in sand than the genuine one. better still if you run a pre-filter such as outerwares or a K&N pre-charger.
get onto www.hardimanatv.com.au and Shane will be able to help you out with a filter and jetting advice.
_________________
www.thumbpump.com
www.dirtcomp.com.au |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
