 |
|
|
|
|
|
|
|
|
|
PeteW
Moderator
Joined: 09 Feb 2006
Posts: 1877
Location: Doreen, Vic
|
 Posted: Fri Nov 14, 2008 12:26 pm Post subject: TRX70 Parts |
  |
|
Looking for some bits for an 86 TRX70,
mostly rear end like the sprocket carrier and or a whole axle assembly.
Also after a carb and airbox.
all these bit were the same on the same 85/86 ATC70's too.
_________________
www.thumbpump.com
www.dirtcomp.com.au |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
Quad
The Day Starts With OZATV !
Joined: 22 Oct 2006
Posts: 2773
Location: UP FRONT
|
| Posted: Fri Nov 14, 2008 2:57 pm Post subject: |
|
|
i have still a ex 88 model rear end complete. if you needit.
we had all 3 models 86,87,and the 88 model with foot brake.
may have air filer too com plete. |
|
| |
|
|
|
|
|
|
|
|
PeteW
Moderator
Joined: 09 Feb 2006
Posts: 1877
Location: Doreen, Vic
|
|
| |
|
|
|
|
|
|
|
|
Quad
The Day Starts With OZATV !
Joined: 22 Oct 2006
Posts: 2773
Location: UP FRONT
|
| Posted: Thu Nov 20, 2008 3:26 pm Post subject: |
|
|
| yes |
|
| |
|
|
|
|
|
|
|
|
PeteW
Moderator
Joined: 09 Feb 2006
Posts: 1877
Location: Doreen, Vic
|
| Posted: Thu Nov 20, 2008 3:40 pm Post subject: |
|
|
how much to you want for it?
I'm also after a standard bumper and grab bar for it too if there are any out there.....
_________________
www.thumbpump.com
www.dirtcomp.com.au |
|
| |
|
|
|
|
|
|
|
|
bullet
The Day Starts With OZATV !
Joined: 09 Sep 2006
Posts: 1518
Location: Middleton SA
|
| Posted: Thu Nov 20, 2008 4:32 pm Post subject: |
|
|
I should have a carby (or close) lying around.
I'll bring it to Warny.
You can have it.
_________________
Can-Am X Team
Bullet #Y12. MrsB #Y18. |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
