iconman
50cc nipper
Joined: 26 Jun 2008
Posts: 29
Location: Perth
 |
 Posted: Mon Sep 22, 2008 3:52 pm Post subject: Banshee frame 2000 model |
  |
|
I have a Banshee frame from a 2000 model that has been sand blasted and painted with 2-pack matt black. It is slightly bent at front left lower section where the bottom a-arm bolts on but could be straightened by the right person. Just means the left front wheel sits back about 25mm.
Asking $100.00 located in Perth.
Cheers. |
|
