 |
|
|
|
|
|
|
|
|
|
twinrock
90cc 2 stroke / 110 4 stroke
Joined: 03 Jul 2007
Posts: 76
|
 Posted: Fri Aug 29, 2008 10:02 am Post subject: banshee big bore top end |
  |
|
hey guys i got a stock top end that has been re sleaved with a L.A sleave it has an awsome port job done and sits at 69.50mm bore it is in perfect conditon, im up grading so have no need for it..it has been on a road bike so has never been ridden hard the only minus is that the water plugs have been blocked up as they stuck out too far in my bike/frame.. ready to just bolt on and go..u may need a new head gasket u can buy big bore ones from ur local yam dealer around $40... i have no pics as the barrles are still on the bike ..but can remove for serious bidders i will be removing them in the next couple of days.. stuff is in newcastle i will post any where..
parts included head,pistons,lil end bearings,barrels..
$600 |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
4stroker
Joined: 15 Jan 2007
Posts: 1420
Location: North Queensland
|
| Posted: Fri Aug 29, 2008 11:14 am Post subject: |
|
|
what pistons does it use?
_________________
2002 SE Banshee |
|
| |
|
|
|
|
|
|
|
|
twinrock
90cc 2 stroke / 110 4 stroke
Joined: 03 Jul 2007
Posts: 76
|
| Posted: Fri Aug 29, 2008 11:28 am Post subject: |
|
|
| its a one from L.A sleave its a cast piston u can buy them direct from them or serco in oz..u can also run a forged if u wanted tdr superstore sells them aswell will go up to 72mm so lots of life |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
