OZ ATV :: The Australian ATV Forum

[sir_smp]

Hi All

ATVs used to be my life however sadly I have had to move on and I must move my bikes

this is a no compromise dedicated full house competition bike. One of the most competitive Banshees in Australia, was a multi class winnig bike a few years ago. Needs a clean up but she is mechanically A1

This bike cost over $25,000 to develop to its current state. Engine has just had a complete return to zero hours ground up rebuild at a cost of OVER $4000 which is not included in the development cost above.

Upgrades see below:

Fully seam welded, strengthened through rear shock mount and all other high stress points, DG Alloy Nerf Bars, DG Alloy Front bumper, DG Alloy grab rail, Round housing swing arm, Twin row bearing carrier, Ohlins custom suspension, +2+1 A arms, Durablu 2+2 Axle, Durablu posilock axle nut, Cast Alloy spindles, Pro taper Handlebars CR High bend, Magura Twist throttle, Magura Hydraulic clutch, Renthal Twin wall Grips, Pro design Kill cord, Modified steering stem, Billet handlebar clamps, Steering damper mounts, Braided brake lines, Custom clutch cylinder, Yamaha factory rods, expertly ported cylinders, Match ported crankcase, Ported reed blocks, Moto tassinarri carbon fibre reeds, High spec crank bearings, Squished and redomed head, Blue printed throughout, Kehin PWK 38mm Flat slides(Brand new, just tuned to engine), Trimmed guards, N-style graphics kit, N-style seat, Re foamed seat for lower profile, K&N pod filter on custom pod mount, K&N filter skin, Double rolled lip Anodized Black Custom rims integrated with internal Pneumatic double Bead locks on all wheels with duel pressure per tyre capability (this cost $600 a wheel without tyres) FMF Gold series SST pipes, FMF powercore IV SST mufflers

Lots of spares, rare opportunity for a full house banshee at a fraction of the build price

I am serious about selling this bike, it is advertised on bike sales for 8900 but I will seriously sell it right now for $6,500

You try and buy a better deal but please... seriously.... dont ring to make an offer below this and dont ring to talk about Banshees unless you are serious about buying this bike . Can arrange demo for serious buyers

$6500 bargain!

Paul Beutel
0407 554 331
paul@apamfg.com.au








Last edited by sir_smp on Wed Nov 21, 2007 9:47 am; edited 1 time in total

[Ozzy84]

have a look in the general discussion section for info on how to add pictures, its a 'sticky' up the top..

sound like a sweet bike, looking forward to photos

[sir_smp]

Cheers I think its all done now

Yeah it is a sweet bike, fast and competetive, It has beaten 400 powervalve kit engines, the engine builder was ex 70's RD GP bike championship builder. Dont believe me... I dont care, if you ride it your questions will be answered, proof of its a ability to breath is that this engine will idle and be smooth of the bottom whilst running 38PWKs, talk to anyone who SERIOUSLY knows RD or banshee engines and they will agree that nothing but a really good setup will do that. The secret to this engine is the monster transfer ports and crankase porting and overall flow rates from huge & clean intake. Engine was built as a midrange MX engine but with a change of reeds and Exhaust height will make it a top ender if you just want to drag it or go dunning

I also have spare wheels and even a set of new 10" hoosier slicks for the back and tons of gear as well, a lot of it brand new, ill start another topic and upload pics of that stuff when I get some more time.

Thanks for looking everyone and yeah like I said bike needs a little TLC and a clean up but check out what you get, a second hand average banshee is still 5K so this is a bargain, priced to sell

be quick, if you would like to ring up or buy this bike please make sure you have money first........ This sounds harsh but I get calls by 15 year old school boys reading the bike sales add and offering their life savings of $500 plus a poor me story, hence why I have it advertised on here for a bargain price at an audince that knows what this thing is

Oh I forgot to mention, I live Chirnside Park which is east Victoria, will deliver melbourne metro only all else is pick up only and freight for interstaters is buyers responsibility

Last edited by sir_smp on Wed Nov 21, 2007 11:33 am; edited 2 times in total

[Stock As A Rock]

WOW What a Bike, If i had the money it would be sold But no i dont Whyyyyyy Meeeeeee......LOL good luck Buddy should sell no worries for that price, you put in the hard time no someone gets a bargain....
_________________
"Its Only A Flesh Wound !!!"
_________________

[sir_smp]

bump bump

shes still fo sale guys, give me a hoy bargain performance banshee

0407 554 331

[dmn_jimmi]

Have you got any spares left over from yuor shee???