 |
|
|
|
|
|
|
|
|
|
(sic)
50cc nipper
Joined: 15 Oct 2006
Posts: 15
Location: Adelaide
|
 Posted: Wed Dec 13, 2006 10:26 am Post subject: Installing FMF Pipes and Jetting a Banshee |
  |
|
Hello all
I have a 03 Banshee with the following mods (that i know of)
New air filter
Reed Spacers and some kind of aftermarket reeds
shaved heads and porting i think.
Shift-pro shift kit
Stock Carbys
It had the stock exhaust on it so i have put on a set of FMF Fattys and Powercore 2 silencers. Before i put these on i checked the jets and found it had 270s in each carby. I found a pair of 310s lying around so i stuck those in and tried them with no luck. What size jets would you guys reccomend i put in the carbys? |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
Banshee250R
Moderator
Joined: 08 Jul 2006
Posts: 1101
Location: Newcastle. NSW
|
| Posted: Wed Dec 13, 2006 10:36 am Post subject: |
|
|
i had a 06 banshee with pro circuits,tdr reeds,K&N filter with stock carbs
and ran a 280 main and standard pilot jet but it needed a larger pilot
hope this helps
cheers
luke
_________________
Doin skids for the kids and doughnuts for the grown-ups
------------------------------------------------ |
|
| |
|
|
|
|
|
|
|
|
OZ_450
The Day Starts With OZATV !
Joined: 12 Feb 2006
Posts: 1631
Location: those who need to know knows :)
|
| Posted: Wed Dec 13, 2006 7:00 pm Post subject: |
|
|
very rarely should you need to change the pilot with a pipe added
what is it doin with the 310?
_________________
black covered in 5.7 powered oversize quad
model vx ss 350 hahaha
enough bass to compensate for lack of skills
Empty Wallet Racing proudly on track for GM Motorsport  |
|
| |
|
|
|
|
|
|
|
|
mildgen
Blaster class
Joined: 02 Oct 2006
Posts: 154
Location: brisbane
|
| Posted: Wed Dec 13, 2006 9:12 pm Post subject: |
|
|
hi sic, i have recently instaled some fattys and have been trying to sort out the jetting aswell (i feel your pain  ). try www.bansheehq.com these guys will get you close...... have fun |
|
| |
|
|
|
|
|
|
|
|
(sic)
50cc nipper
Joined: 15 Oct 2006
Posts: 15
Location: Adelaide
|
| Posted: Thu Dec 14, 2006 10:35 am Post subject: |
|
|
cheers guys.
i took out the pilots last night and found that they were 30s, so i left them in there. I let it sit for a bit then started it up first go
It seems ok now with 310s (havnt rode it round yet, but it seems good). |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
