 |
|
|
|
|
|
|
|
|
|
$$$TRAV$$$
Blaster class
Joined: 28 Feb 2008
Posts: 175
Location: Perth WA
|
 Posted: Fri Jul 25, 2008 9:49 pm Post subject: a arms |
  |
|
hey all do yfz 450 a arms fit straight into a blaster...... are there any modifications needed
_________________
LTR 450
ELKA ELITES
LONESTAR A ARMS
LONESTAR STEM
LONESTAR AXLE
FLEXX BARS
DOUGLAS BEADLOCKS
ASV LEVERS
YOSHI PIPE
CHERRY BOMB
AC BUMPER
BLINGSTAR NERFS + HEELGUARDS
MAIER PLASTICS
SAVAGE SUZUKI GRAPHICS
RAZR 2S |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
PeteW
Moderator
Joined: 09 Feb 2006
Posts: 1877
Location: Doreen, Vic
|
| Posted: Sun Jul 27, 2008 7:40 pm Post subject: Re: a arms |
|
|
| $$$TRAV$$$ wrote: | | hey all do yfz 450 a arms fit straight into a blaster...... are there any modifications needed |
they do fit but not straight on, the top one needs to be about 1 inch shorter and the ends of the frame end need to be cut down to fit in the blaster a arms mounts, if you do this though you need to run the longer shocks from the YFZ too. you'll also have to modify the top of the blaster spindle to take the YFZ ball joint taper (weld around the hole and ream out with a tapered ream)
_________________
www.thumbpump.com
www.dirtcomp.com.au |
|
| |
|
|
|
|
|
|
|
|
$$$TRAV$$$
Blaster class
Joined: 28 Feb 2008
Posts: 175
Location: Perth WA
|
| Posted: Sun Jul 27, 2008 9:46 pm Post subject: |
|
|
cheers man no worries im better off forkin out a bit more and get good a arms and shocks
_________________
LTR 450
ELKA ELITES
LONESTAR A ARMS
LONESTAR STEM
LONESTAR AXLE
FLEXX BARS
DOUGLAS BEADLOCKS
ASV LEVERS
YOSHI PIPE
CHERRY BOMB
AC BUMPER
BLINGSTAR NERFS + HEELGUARDS
MAIER PLASTICS
SAVAGE SUZUKI GRAPHICS
RAZR 2S |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
