 |
|
|
|
|
|
|
|
|
|
Kymanic
50cc nipper
Joined: 10 Nov 2007
Posts: 47
Location: North Brisbane
|
 Posted: Mon May 05, 2008 8:21 pm Post subject: Wiseco or JE piston kit ? |
  |
|
Time to rebuild the 660 raptor 2004 model. Currently on stock bore that is out of tolerance. Bike is stock standard.
It needs reboring etc etc.
After some opinions from those that have been in the game for a while.
Wiseco piston kit or JE piston kit ? |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
TUFF AS
Big Bore, Stroked & Bling +
Joined: 09 Jan 2007
Posts: 497
Location: sydney
|
| Posted: Tue May 06, 2008 3:37 pm Post subject: |
|
|
give zac at explosive racing a call he will give you advice and supply the parts.
cheers brad,
_________________
07 BANSHEE 91hp atw at the moment
04 WR450F still yet to know hp |
|
| |
|
|
|
|
|
|
|
|
ReD HeaderZ
Roostin Away
Joined: 24 Jul 2006
Posts: 828
|
| Posted: Tue May 06, 2008 4:31 pm Post subject: Explosive |
|
|
| And Zak will say no Wiseco..... never ever, JE or CP are the most reliable from what Zak explained to me when I did my bike up..... |
|
| |
|
|
|
|
|
|
|
|
SIKMIC
Moderator
Joined: 29 Jun 2006
Posts: 1112
Location: Moranbah Qld
|
| Posted: Tue May 06, 2008 6:37 pm Post subject: |
|
|
Can I ask what is so bad about Wiseco? 
I know Dad has been using them for about 10 years and never had a problem and I have had them in all of my bike and quad engines, none were even close to stock engines(excluding current YFZ, stock engine) and never had problems with any of them. No problems that could have at all been caused by the piston anyway. 
_________________
Mic
YFZ450
Thanks to ATV's Unlimited &
Luke Beechey Motorsports
mic902@hotmail.com |
|
| |
|
|
|
|
|
|
|
|
ReD HeaderZ
Roostin Away
Joined: 24 Jul 2006
Posts: 828
|
| Posted: Tue May 06, 2008 8:37 pm Post subject: hmmm |
|
|
| SIKMIC wrote: | Can I ask what is so bad about Wiseco?
I know Dad has been using them for about 10 years and never had a problem and I have had them in all of my bike and quad engines, none were even close to stock engines(excluding current YFZ, stock engine) and never had problems with any of them. No problems that could have at all been caused by the piston anyway. |
''
I have no idea, raptorforum.com, tonnes of guys always use em....
That is Zaks opinion, he quoted "If you buy wiseco, build the bike yourself" |
|
| |
|
|
|
|
|
|
|
|
mex087
50cc nipper
Joined: 12 Jan 2008
Posts: 48
Location: seaham
|
| Posted: Sat Jun 21, 2008 6:29 pm Post subject: |
|
|
wiseco pistons are over-rated , i would not use them in any of my motors.
they shrink during run in . prox or vertex or wossner are all great |
|
| |
|
|
|
|
|
|
|
|
PeteW
Moderator
Joined: 09 Feb 2006
Posts: 1877
Location: Doreen, Vic
|
| Posted: Sat Jun 21, 2008 9:17 pm Post subject: |
|
|
just imagine the little indian bloke from that crap bingo show on channel 7 "Nooooo Wiseco"
Not a big fan of wiseco for 4T pistons seen a few of them crack, especially high comp. JE or CP are the way to go
_________________
www.thumbpump.com
www.dirtcomp.com.au |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
