 |
|
|
|
|
|
|
|
|
|
450atvnut
Blaster class
Joined: 07 Jul 2006
Posts: 150
Location: Townsville QLD
|
 Posted: Mon Apr 28, 2008 5:40 pm Post subject: skid plate clearance |
  |
|
I have just fitted a new alloy skid plate to my 05 YFZ450. There is no plastic guard between the two. The chain actually hits the guard at times. This is the last thing from a full strip down rebuild. Have I missed something. It is a new chain also.
Should I cut a section of the front edge to give extra clearance?
Get some thick rubber and attach along the line of chain and sprocket?
Any advise please
 |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
Quad
The Day Starts With OZATV !
Joined: 22 Oct 2006
Posts: 2773
Location: UP FRONT
|
| Posted: Mon Apr 28, 2008 5:56 pm Post subject: |
|
|
| HI just a question that bolt in the swing arm allen key ,is it HTbolt . |
|
| |
|
|
|
|
|
|
|
|
greenhuman
Roostin Away
Joined: 12 Feb 2006
Posts: 980
|
| Posted: Mon Apr 28, 2008 5:58 pm Post subject: |
|
|
| What brand skidplate? Looks like a W Bros. |
|
| |
|
|
|
|
|
|
|
|
Quad
The Day Starts With OZATV !
Joined: 22 Oct 2006
Posts: 2773
Location: UP FRONT
|
| Posted: Mon Apr 28, 2008 5:59 pm Post subject: |
|
|
| large shifter and bend it down a little. |
|
| |
|
|
|
|
|
|
|
|
Quad Squad
Blaster class
Joined: 05 Apr 2007
Posts: 193
Location: Melbourne
|
|
| |
|
|
|
|
|
|
|
|
450atvnut
Blaster class
Joined: 07 Jul 2006
Posts: 150
Location: Townsville QLD
|
| Posted: Mon Apr 28, 2008 8:14 pm Post subject: |
|
|
Cheers for that. I will try the bend and fit the old one and see how it goes.
Not sure on the bolt, it was one that came with it. Has only been on a little while. Hasn't taken long for it to develop surface rust. |
|
| |
|
|
|
|
|
|
|
|
Quad
The Day Starts With OZATV !
Joined: 22 Oct 2006
Posts: 2773
Location: UP FRONT
|
| Posted: Mon Apr 28, 2008 8:40 pm Post subject: |
|
|
| check the bolt , if its not a grade 8 toss it and get std one ,i might have one ill post it free than use a dangerous thing that might snap and hert or k... you .so remove it and check it out thanx. |
|
| |
|
|
|
|
|
|
|
|
450atvnut
Blaster class
Joined: 07 Jul 2006
Posts: 150
Location: Townsville QLD
|
| Posted: Mon Apr 28, 2008 9:21 pm Post subject: |
|
|
Roger that. Will check morrow and replace all of the if thats the case.
Cheers for the help. |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
