 |
|
|
|
|
|
|
|
|
|
rumquad
50cc nipper
Joined: 03 Jun 2006
Posts: 6
Location: GOSFORD N.S.W
|
 Posted: Sun Oct 08, 2006 4:07 pm Post subject: fitting a kill switch to ltz250 |
  |
|
| I was hoping for some one to be able to point me in the right direction in how to connect the killl switch. Also with the way it works when the switch is disconnected. |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
PeteW
Moderator
Joined: 09 Feb 2006
Posts: 1877
Location: Doreen, Vic
|
| Posted: Sun Oct 08, 2006 10:37 pm Post subject: |
|
|
Hey rumquad, first you need to trace the pulse wire from the stator, follow the stator loom up from where it comes out of the cases upto where it joins into the main loom, out of the stator loom the pulse wire is usually white or white with a blue stripe. strip some insulation back on this wire (or use a scotch cilp) and attach one of the kill switch wires there. attach the other wire from the kill switch to earth (on the chassis somewhere) and you should be good to go.
_________________
www.thumbpump.com
www.dirtcomp.com.au |
|
| |
|
|
|
|
|
|
|
|
rumquad
50cc nipper
Joined: 03 Jun 2006
Posts: 6
Location: GOSFORD N.S.W
|
| Posted: Tue Oct 10, 2006 6:42 pm Post subject: |
|
|
| is this the little black circular thing, near the head light assembly. It has a white with blue strip wire coming out of it with a connector on it. |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
