 |
|
|
|
|
|
|
|
|
|
Hudson
4fiddy Racer
Joined: 12 Feb 2006
Posts: 287
Location: This Week... Back in Texas
|
 Posted: Wed Mar 26, 2008 3:21 pm Post subject: Fasst Flexx Bars |
  |
|
I know this topic has been on this forum a few times but through reading all the posts can't find what bend and height most guys are using. Anyone with these on their bike if you could tell me what you are using and if you would change your bend or height.
Thanks in advance just about to pick up a set before I come back home from the states this week |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
OZ_450
The Day Starts With OZATV !
Joined: 12 Feb 2006
Posts: 1631
Location: those who need to know knows :)
|
| Posted: Wed Mar 26, 2008 5:46 pm Post subject: |
|
|
hey i am running flexx bars standard atv height and bend i was running normal tag style sx bars before and thought these would feel high to me but have been surprised to how great they feel
i know Azza was running mx 2 wheeler height ones as he found these suited him better
think ya would have to try and get a quad with both sets on and try them
_________________
black covered in 5.7 powered oversize quad
model vx ss 350 hahaha
enough bass to compensate for lack of skills
Empty Wallet Racing proudly on track for GM Motorsport  |
|
| |
|
|
|
|
|
|
|
|
bullet
The Day Starts With OZATV !
Joined: 09 Sep 2006
Posts: 1518
Location: Middleton SA
|
| Posted: Fri Mar 28, 2008 10:29 am Post subject: |
|
|
They now come in a few more shapes.
If you like standard bars then the 14 or 15 degree bars might suit you best.
As far as height gos... on most quads you will need to run block risers to mount the Flexx Bars as they are a fat bar diameter.
I ran the high Flexx Bars on my 90 and ended up cutting the risers down because I thought they were too high.
MrsBullet runs the low moto bars with standard risers so our set ups are about 20mm diferent in height.
I reckon you could vary heights about 50mm including playing with the risers.
Flexx bars are the most adjustable on the market, so to some degree you can simply add elastomer spacers or tighten the mounting bolts to change the handle bar end heights. If you find you are prefering higher or lower you can then change the risers (not expensive).
I originally thought I wanted 14 degree bars, but had to settle for a 12 degree set at the time...
but now I wouldn't have it any other way and will always spec the 12 degree option.
IMO, any set of Flexx Bars is a big advantage over whatever else you could have.
Talk to Adam from Quad Squad, I'm sure hell be able to quickly feel out what might best suit you and he might be able to offer a try / swap scenario.
_________________
Can-Am X Team
Bullet #Y12. MrsB #Y18. |
|
| |
|
|
|
|
|
|
|
|
Hudson
4fiddy Racer
Joined: 12 Feb 2006
Posts: 287
Location: This Week... Back in Texas
|
| Posted: Fri Mar 28, 2008 10:43 am Post subject: |
|
|
| Thanks Bullet I leave the states tomorrow and I'll give him a shout early next week |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
