 |
|
|
|
|
|
|
|
|
|
millsy380cc
90cc 2 stroke / 110 4 stroke
Joined: 01 Mar 2008
Posts: 56
|
 Posted: Sat Mar 15, 2008 8:11 pm Post subject: carbie size and type |
  |
|
| i have a long rod banshee motor and was just wondering what size and type carbie you guys reckon i should be looking for as a replacement for the stock ones has v force reeds toomey t5s advance timing plate and im looking at buying a coolhead any help would be great....... |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
TUFF AS
Big Bore, Stroked & Bling +
Joined: 09 Jan 2007
Posts: 497
Location: sydney
|
| Posted: Sat Mar 15, 2008 8:26 pm Post subject: |
|
|
what sort of riding do you do?
_________________
07 BANSHEE 91hp atw at the moment
04 WR450F still yet to know hp |
|
| |
|
|
|
|
|
|
|
|
Quad
The Day Starts With OZATV !
Joined: 22 Oct 2006
Posts: 2773
Location: UP FRONT
|
| Posted: Sat Mar 15, 2008 8:53 pm Post subject: |
|
|
| std carbs your got std motor . |
|
| |
|
|
|
|
|
|
|
|
millsy380cc
90cc 2 stroke / 110 4 stroke
Joined: 01 Mar 2008
Posts: 56
|
| Posted: Sat Mar 15, 2008 8:55 pm Post subject: what carbie |
|
|
| do alot of trail and beach riding |
|
| |
|
|
|
|
|
|
|
|
Quad
The Day Starts With OZATV !
Joined: 22 Oct 2006
Posts: 2773
Location: UP FRONT
|
| Posted: Sat Mar 15, 2008 8:58 pm Post subject: |
|
|
| like i said, std will do all that you do save your money. |
|
| |
|
|
|
|
|
|
|
|
millsy380cc
90cc 2 stroke / 110 4 stroke
Joined: 01 Mar 2008
Posts: 56
|
| Posted: Sat Mar 15, 2008 9:07 pm Post subject: carbie |
|
|
| fair enough thaks for that any other ideas for ringing a little more performance outta the banshee then. |
|
| |
|
|
|
|
|
|
|
|
Quad
The Day Starts With OZATV !
Joined: 22 Oct 2006
Posts: 2773
Location: UP FRONT
|
| Posted: Sat Mar 15, 2008 9:21 pm Post subject: |
|
|
4 whot you do riding std carbs and good tune up will do ,open air box lid 27 pilots 260 mains pipes k&n filter is fine .
if you need any of these parts try your local quad bloke, or JMC RACING HES IN NEWCASTLE for all the parts and more imfo. have fun riding. |
|
| |
|
|
|
|
|
|
|
|
TUFF AS
Big Bore, Stroked & Bling +
Joined: 09 Jan 2007
Posts: 497
Location: sydney
|
| Posted: Sun Mar 16, 2008 8:00 am Post subject: |
|
|
but if you still want bigger carbs but to keep ur bottom end and to give a performance over the entire power range i would go for some 30mm if you talk to nickbb1 i think he recently put a set of 30mms on his banshee!
cheers brad,
_________________
07 BANSHEE 91hp atw at the moment
04 WR450F still yet to know hp |
|
| |
|
|
|
|
|
|
|
|
looking
Big Bore, Stroked & Bling +
Joined: 11 Jul 2007
Posts: 335
|
| Posted: Sun Mar 16, 2008 8:15 am Post subject: |
|
|
sure did
its the best thing ive ever done
got 57hp out of her to. |
|
| |
|
|
|
|
|
|
|
|
bansheebuzz
4fiddy Racer
Joined: 07 Aug 2007
Posts: 255
Location: Gold Coast
|
| Posted: Sun Mar 16, 2008 8:50 am Post subject: |
|
|
| i prefer a single carb setup for general trail riding, currently run a single 34mm power jet mikuni flatslide |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
