 |
 |
OZ ATV :: The Australian ATV Forum
Australia's Largest ATV Forum
|
|
|
|
|
|
|
|
|
|
|
nrp77
50cc nipper
Joined: 22 Oct 2007
Posts: 42
Location: Brisbane/Ipswich
|
 Posted: Sun Nov 04, 2007 2:21 pm Post subject: 660 Air box lid removed - Help |
  |
|
G'day guys,
I have an 04 Raptor in stock form, and have removed the airbox lid. I now have a bit of a flat spot on WOT. I have taken the needle clips from the centre position and lowered then to the bottom position to increase fuel flow. It is now a bit sluggish to come on to peak power but when it gets there, it goes way better than it ever has.
Is there a recommended needle position or jetting changes for lid removal on a stocke engined machine? |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
fossil800R
The Day Starts With OZATV !
Joined: 22 Aug 2007
Posts: 1166
Location: Barkly, Victoria
|
| Posted: Sun Nov 04, 2007 2:37 pm Post subject: Re: 660 Air box lid removed - Help |
|
|
| nrp77 wrote: | G'day guys,
I have an 04 Raptor in stock form, and have removed the airbox lid. I now have a bit of a flat spot on WOT. I have taken the needle clips from the centre position and lowered then to the bottom position to increase fuel flow. It is now a bit sluggish to come on to peak power but when it gets there, it goes way better than it ever has.
Is there a recommended needle position or jetting changes for lid removal on a stocke engined machine? |
Jump on the raptor forum and search either in the 660 section or use the search engine on the home page. I have just had a quick look and there seems to be a stack of posts on the subject of re jetting for different types of mods.
www.raptorforum.com
_________________
I'm not suffering from insanity, I'm enjoying it!!! |
|
| |
|
|
|
|
|
|
|
|
greenhuman
Roostin Away
Joined: 12 Feb 2006
Posts: 980
|
| Posted: Sun Nov 04, 2007 2:39 pm Post subject: |
|
|
| Get a DynoJet kit. The kit comes with better needles, main jets and instructions for different mods. |
|
| |
|
|
|
|
|
|
|
|
nrp77
50cc nipper
Joined: 22 Oct 2007
Posts: 42
Location: Brisbane/Ipswich
|
| Posted: Sun Nov 04, 2007 3:57 pm Post subject: |
|
|
Thank guys. Raptorforums is a wealth of useful info. Figured what I need to do.
Cheers |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
© 2001, 2002 phpBB Group
|
|
|
