 |
|
|
|
|
|
|
|
|
|
breno213
Roostin Away
Joined: 16 May 2007
Posts: 749
Location: South Australia
|
 Posted: Thu Aug 25, 2011 9:46 am Post subject: what bars do you run |
  |
|
Ok this is what im wanting to know for the every day mx. An enduro rider what bars are you running. What hight are they high or low an degrees are they an why.
Im gonna be buying a set of flexxsbars soon an want to know what most people are useing. Yfz 450r +1+1 stem im thinkinging high bar 12 degree.
_________________
All Thanks to=
Q.R.S.A my club
Yamaha pittmans
Roll design
and my family for all there support #213 #172#619 #247 |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
phil58
4fiddy Racer
Joined: 15 Dec 2009
Posts: 271
Location: sw vic
|
| Posted: Fri Aug 26, 2011 8:32 am Post subject: |
|
|
I`m using Flexx adventure(high) bars with a 15 degree bend with yellow on the compression and red on the rebound....
_________________
Phil..... |
|
| |
|
|
|
|
|
|
|
|
boosted22
Blaster class
Joined: 16 Jun 2010
Posts: 147
Location: whyalla - sa
|
| Posted: Fri Aug 26, 2011 10:39 am Post subject: |
|
|
| I have 14 quad bend, they feel great, just remember what u wanna keep on the bars as I still have everything on my yfz450r switchs an stuff and just fit it all on, the kill switch I couldn't tho and is mounted on the bar clamp so the more room ie- wider bar the better I say lol |
|
| |
|
|
|
|
|
|
|
|
breno213
Roostin Away
Joined: 16 May 2007
Posts: 749
Location: South Australia
|
| Posted: Fri Aug 26, 2011 10:42 am Post subject: |
|
|
What bend would you say the yfz450 r bars are?
_________________
All Thanks to=
Q.R.S.A my club
Yamaha pittmans
Roll design
and my family for all there support #213 #172#619 #247 |
|
| |
|
|
|
|
|
|
|
|
boosted22
Blaster class
Joined: 16 Jun 2010
Posts: 147
Location: whyalla - sa
|
| Posted: Fri Aug 26, 2011 10:56 am Post subject: |
|
|
yer I tried to find that out my self so I could use it as a guide, but couldn't find any info on yfz, i just seen the 14 had the extra bar room and was a common choice so went with that, I do have a new 12 bend but there in the box still and haven't tried em yet  |
|
| |
|
|
|
|
|
|
|
|
mitch41
Roostin Away
Joined: 12 Jan 2009
Posts: 535
Location: Brisbane
|
| Posted: Fri Aug 26, 2011 7:35 pm Post subject: |
|
|
I use 14 degree quad bend "high" flexx bars with yellow on the compression. I run them with a +2 stem and they are sooo good.
I tried using the blue compression elastomers but they just gave me arm pump from being too soft (i think) lol. |
|
| |
|
|
|
|
|
|
|
|
yogie
Moderator
Joined: 14 Feb 2006
Posts: 3620
Location: The Otways
|
| Posted: Fri Aug 26, 2011 8:22 pm Post subject: |
|
|
I'm running tag2's and are waiting for my Flexx adventure(high) bars with a 15 degree bend with yellow on the compression and red on the rebound...
_________________
2005 KFX700
With a few bells and whistles
and the twin yoshi's
American Star A-arms, tie rods
elka stickers
Shorty Shifter
I have a Waco
rossco gave me a flexx sticker 
honda thumb
Great at climbing trees 
durablue stickers |
|
| |
|
|
|
|
|
|
|
|
breno213
Roostin Away
Joined: 16 May 2007
Posts: 749
Location: South Australia
|
| Posted: Sat Aug 27, 2011 1:19 am Post subject: |
|
|
Whats the adventure part mean thought its just high. Low an all the degrees. An there 32. 31. so on. ? ??is there differents between them all
told today the middle bar clap part of the bar some are longer there than others an they are all the same in the hand grip area this is rather confuseing. Thanks for the feed back.
_________________
All Thanks to=
Q.R.S.A my club
Yamaha pittmans
Roll design
and my family for all there support #213 #172#619 #247 |
|
| |
|
|
|
|
|
|
|
|
mitch41
Roostin Away
Joined: 12 Jan 2009
Posts: 535
Location: Brisbane
|
| Posted: Sun Aug 28, 2011 2:10 pm Post subject: |
|
|
the part that the bar clamps attach to is different because of the quad bend, the 2 wheeler bars have a "shorter" section I think? it might have been a longer section.
And the adventure means that the bars are a tad higher than the mx version, which are low. |
|
| |
|
|
|
|
|
|
|
|
breno213
Roostin Away
Joined: 16 May 2007
Posts: 749
Location: South Australia
|
| Posted: Sun Aug 28, 2011 7:48 pm Post subject: decission |
|
|
Thanks guys for all your info on the flexxs bars ive made my mind up now. going with the 32. ,high, 12 degrees.
_________________
All Thanks to=
Q.R.S.A my club
Yamaha pittmans
Roll design
and my family for all there support #213 #172#619 #247 |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
